How to Make Your Own String Art

Learn how to create your own large scale DIY string art to say your message loud and clear.
Related To:

Oh, Pinterest. Why do you insist on filling my head with beautiful DIY projects that kick off countless ideas I feel a compulsive need to try? I’ve gotten a bit more selective about how much time I spend on Pinterest because I find my own creativity can get a little stymied in the face of such an onslaught of creative brilliance, but I just can’t give it up. It’s just too good. One project I’ve seen in many iterations that always catches my eye is string art. I’m a word nerd AND a font snob, so DIY art projects that use words and typeface are kind of my jam.

I recently created a trade show display for Mr. Fox Composting and when I was almost done, I decided it needed an extra finishing touch. I’d made a custom hand-painted backdrop, as well as a bunch of accessories for their table, but it needed one more hip and rustic touch. Mr. Fox Composting is doing VERY COOL THINGS, so I loved working with them and the fact that they gave me full creative freedom was the cherry on the top. Lickity split, I saw my opportunity to bust out some string art and jumped on it. I had some plywood waiting in the wings, so I cut it down to size, sanded the rough edges, stained it a dark walnut, and then gave it a couple thin coats of poly to make it weatherproof. And then … my week-long marathon of tiny nails and banged up fingers began.

Yes, it was VERY time consuming. Yes, I learned just how unskilled I am with a hammer. And yes, it was totally worth it.

Right off the bat, I have to admit that I got so giddy about getting elbow deep in nails and hammering, I totally forgot to take pictures of how I cut, sanded, stained and poly’d the plywood. Buuuuuut then again, it’s you guys. You know what you’re doing. So, we’ll all laugh at what a goober I am and you’ll forgive me for jumping in mid-project. Right? GREAT. In order to trace my copy onto the plywood and pencil in the placement of the nails, I first covered the front face of my plywood with kraft paper. And then I dragged my old yoga mat out of the basement to give myself a buffer in case any nails came through the back of my plywood, and to reduce skid and vibration. 

Next up, I tapped into my inner AV wizard. Just kidding. The fastest way I could think of to get the lettering I wanted onto the plywood was to project it on the board and then trace the lettering with pencil onto the kraft paper. So I bumbled my way through setting up a borrowed projector, which was another lesson in “Skills I Don’t Possess.” Once I finally pulled up my file and got it centered and correctly sized, all I had to do was trace the outline of each letter. 

I decided to space my nails every half inch and marked a dot all the way around each letter. 

Once I had all of my letters marked out for nail placement, it was time to get started hammering. I’m not going to lie — this part was WAY more time consuming than I’d anticipated. Possibly because I’m apparently TERRIBLE at hammering small nails consistently. 

A whole bunch of banged up fingers later, I was finished hammering in the nails around the copy. 

Then it was time for the ever-so-gratifying paper peeling reveal. 

This is where I had my clapping-with-glee moment. Alone in our living room, thankfully. I was SO glad that my bruised fingers weren’t all for naught, that the white nails were the way to go, and that everything looked level and even. 

I had to play around a bit to find a good way to attach the string to the first nail of each letter, how to string the letters, and how to tie off the string at the end of each letter. My system was to tie off the first nail, string every third nail or so, work my way back around a few times to catch all the gaps and give it a slightly erratic look, and then add a tiny dab of hot glue where I tied off the string on the last nail of each letter. 

What do you think? Would you risk sore thumbs and a bunch of free time for DIY string art? 

Keep Reading

Next Up

How to Make a Paper Airplane

Learn the simple steps for high-flying fun with this tutorial on five basic paper airplane patterns.

Wall Decor Tricks: Decorating in Threes

Grab a trio of items for a quick and cheap (even free) way to freshen up your decor.

How to Make Your Own Watercolor Paints

Try this amazingly easy DIY for artists of all ages.

How to Make a Wall Clock

Almost anything can be turned into a clock. Find out where to buy clock parts and how to assemble a customized wall clock.

 How to Make a Skateboard

There’s nothing quite like cruising around town on your own board!

Cozy Ideas for Decorating Around the Fireplace

Designers share how to restyle and warm up your room so that you and your guests can linger by the fire this winter.

Smile! You Can Make Your Own Toothpaste

DIY toothpaste is cheap and easy to make. It will leave your teeth white and your breath fresh while fighting those dreaded cavities.

How to Build a Decorative Curved Picket Fence

Instead of a straight-line fence, learn how to arch the pickets to give your yard an extra burst of curb appeal.