How to Seal a Deck

Keep your wood deck looking beautiful by applying a fresh coat of deck sealer every year or two.

Pine Deck, view of wood deck boards with wood railing.

TS-93991154_Deck-Boards_s4x3

Pine Deck, view of wood deck boards with wood railing.

Photo by: Beth Van trees

Beth Van trees

By: John Riha

If you’ve opted for a clear or lightly tinted deck sealer to keep the grain of your wood deck showing through, good for you. Few surfaces can compete with the natural beauty of wood.

But your good intentions come with a DIY challenge: wood decks require vigilant maintenance to maintain their natural good looks, and you’ll have to refinish and seal your deck on a regular basis to keep it beautiful and splinter-free.

The job has two parts: cleaning the deck and applying a deck sealer.

Cleaning Your Deck

Start by removing any gunk and debris from between boards — screwdrivers and putty knives are good tools for this chore. Then give your deck a good sweeping.

To prep your deck for sealer, first give it a cleaning using a deck cleaner available at any hardware store or big box outlet. If you have a cedar or redwood deck that’s stained with mold or mildew, use a deck brightener to help remove stains.

You’ll want to protect nearby shrubs and plants with plastic sheets before you start, and choose a cloudy — but not rainy — day for applying the deck cleaner. That way, the sun won’t dry out the cleaner too fast. Apply the cleaner with a paint roller, a garden sprayer, or a bristle brush. To clean wood railings and posts, work from the bottom up. If you work from the top down, spills and splatters can get on dry wood, leaving spots that are difficult to remove.

Let the cleaner sit according the manufacturer’s directions, then rinse thoroughly. Let your deck dry completely — give it at least 48 hours before applying a deck sealer.

Applying a Deck Sealer

Sealers and stains are available at home improvement centers for about $30 per gallon — enough to cover 250 square feet of decking. Your finish options include:

When it comes to choosing the best deck sealer, you’ve got several choices. In general, the more opaque the sealer, the better its weather- and wear-fighting abilities. However, lighter finishes let more of the wood’s natural grain and beauty show through. The more clear the deck sealant, the more often you’ll have to clean and seal your deck.

Sealing a Deck

Sealing a Deck

Do seal your wooden deck every few years. Save yourself some hassle and choose a one-step product that combines stain and sealer. Mitch Kalamian, owner of Solena Landscape Co., recommends Behr’s All-in-One Wood Finish for a good-looking, durable final product.

Photo by: ©iStockphoto.com/NinaMalyna

©iStockphoto.com/NinaMalyna

• Clear and wood-toned sealers enhance wood’s natural grain and color.

• Semi-transparent deck sealer/stains are lightly pigmented and let grain show through but change the tone of your wood. They come in shades of blue, gray, brown, green and red.

Check the forecast for a clear, two-day period with moderate temps between 50 and 90 degrees. Sand the deck to remove any fuzzy grain raised by the washing. Use 80-grit sandpaper, and thoroughly sweep or vacuum the decking when you're done. This is a good time to countersink any raised nail heads or popped screws.

Apply painter’s tape to any nearby surfaces — such as siding — that you need to protect. Apply the deck sealer with a natural bristle brush. A roller is faster, but brushing helps force the sealer into open pores and grain. Make sure to get the sealer into joints where two boards butt together. Apply the deck sealer to three or four boards at once, working their entire length. You don’t want to spill or lap over onto adjacent boards or you’ll have splotches that are hard to conceal.

Inviting Outdoor Space

Multi Level Deck Design

This multi-level deck design features a shaded seating area and a hot tub for relaxing.

Photo by: TimberTech

TimberTech

Next Up

How to Get Rid of Thrips

Thrips can damage your plants before you even know they’re there. Here’s how to spot thrips on plants and get rid of them.

How to Stain a Wooden Deck

Enhance and protect your outdoor design by learning how to stain a deck with these simple steps using deck stain.

How to Clean Patios

Get tips for cleaning your patio made of concrete, natural stone or flagstone without a pressure washer, plus get tips on cleaning and maintaining patio furniture.

How to Sharpen a Knife

Learning to sharpen your knives at home will keep them razor-sharp, making them safer and easier to use.

How to Winterize Your Lawn

Learn what to do to prepare your lawn for winter. Taking the right steps in fall prepares your grass for quick spring greening.

How to Drain a Water Heater

Extend your water heater's life span by draining the tank annually to remove any sediment that may have built up.

Must-Do Swimming Pool Cleaning and Maintenance Tasks (and How Often You Should Do Them)

Keeping a regular cleaning and maintenance schedule will help you work less and enjoy your pool more.

How to Refinish a Wood Deck in a Weekend

See how we cleaned, pressure washed and painted a multi-level deck to give it a fresh look and to maintain it so it will last for years to come.

What Happens if the pH Is Too High in a Pool?

Learn how to lower the pH in your swimming pool. Controlling the pH helps keep the water clear and your pool equipment running smoothly.

How to Get Rid of Skunks in Your Garden

Learn how to get rid of skunks while protecting yourself from their best defense.

Go Shopping

Get product recommendations from HGTV editors, plus can’t-miss sales and deals.

On TV

Follow Us Everywhere

Join the party! Don't miss HGTV in your favorite social media feeds.