DIY Network

Quick Cleaning Tips

How to Remove Stains From Walls and Wallpaper (page 1 of 2)

Check out these expert tips for removing smudges, smears and fingerprints from your walls.

More in Windows Walls and Doors

All About…

More Topics

We asked home-efficiency expert Cynthia Townley Ewer, author of Houseworks, to explain the best methods for cleaning painted walls and wallpaper.

Daily living tends to deposit smudges, smears and fingerprints (especially if there are small children in the household), marring the beauty of walls and woodwork. Whether they're painted or papered, keep walls clean and gleaming with these tips for wall cleaning and maintenance.

How to Clean Painted Walls

On your mark, get set, prep! Cleaning painted walls is a big job, so be prepared. Push furniture to the center of the room, and lay down old sheets or canvas drop cloths to catch soapy drips. Avoid plastic tarps; they don't absorb water and they become slippery when wet. To protect your hands and to remind you where pictures belong, cover picture nails with a chunk of household sponge.

Assemble your wall-washing tools: lamb's wool duster, white cleaning cloths, a natural sponge (avoid colored sponges, since they can deposit dyes on light-colored walls) and two buckets (one filled with cleaning solution and one filled with clear water for rinsing). Rubber gloves or washing-up gloves protect your hands; be sure to turn up glove cuffs to help contain drips. A step stool makes it easier to get to the high reaches for easy cleaning; tools with handles keep wall-cleaning sessions safe.

Ready to Clean

In a bucket, mix a wall-cleaning solution. For normal soil levels, try a mild detergent solution to clean walls that consists of:

  • 1 gallon warm water, to which you add a good squeeze of liquid dishwashing detergent

For more heavily soiled walls, you'll need a stronger alkali solution, but spot-test any cleaning mixture first to ensure it won't remove or lighten paint. Add all of the following to your bucket and give it a good stir before you start:

  • 1 gallon warm water

  • 1 cup clear non-sudsing ammonia

  • 1 cup white vinegar

  • 1 cup washing soda (borax)

The second bucket should hold clean water, to be used for rinsing. Change the water if it starts to look very dirty as you work around the room.

Ditch the Dust

Dust is always easier to remove than mud, so remove any loose dust before bringing moisture into the mix. Circle the room with the lamb's wool duster, wiping walls and woodwork from the top down. Take the duster outside and spin the handle between your palms to release the dust.

Alternately, use a vacuum cleaner's extension wand and bristle brush head (used for upholstery) to remove dust and cobwebs from walls and woodwork.

Bottoms Up

Drips are inevitable when washing walls. Should they run down dry, dirty surfaces, they'll dry and create long muddy stains. Avoid drip issues by washing walls from the bottom up. Yes, you'll drip onto already-cleaned areas, but the solution will be a quick swipe with a sponge, not a tough cleaning job.

Dip the natural sponge into the bucket of cleaning solution, and rub the wall gently to avoid removing paint. Work in small areas, washing and then using the sponge to rinse the area with clear water. Last, blot excess moisture with white cleaning cloths.

Take It to the End

When washing walls, always wash the entire wall, bottom to top and side-to-side. If you need a breather, take it between walls, not in the middle. Stopping the job before you finish the entire wall can cause "wash marks": a wave effect caused by stop-and-go wall washing. Avoid this by washing an entire wall in a single session, using the same type and strength of cleaning solution.

« Previous12Next »

Advertisement