DIY Network

60 How-Tos From Wallace Conway

1. 1. How to Replace a Flue

   

   0 Thumbs

   A backdraft in this homeowner's flue is sending deadly gases into the home. Learn how to remove and replace a faulty flue and secure th...

   Time:

   Two Days

   Cost:

   $100 to $250

   Difficulty:

   Moderate to Hard

2. 2. How to Vent a New Flue

   

   1 Thumbs

   Once a new flue has been installed the next step is to connect it to the water heater in the basement. The following steps show how to ...

   Time:

   Day

   Cost:

   $50 to $100

   Difficulty:

   Moderate

3. 3. New Flue Installation: Replace Drywall

   

   3 Thumbs

   Learn how to complete a new flue installation by replacing and painting the cut drywall.

   Cost:

   $1 to $50

   Difficulty:

   Easy to Moderate

4. 4. How to Replace Rusted Corner Beads

   

   0 Thumbs

   The original corner beads and deck of this home have started to rust. Learn how to replace rusted corner beads with vinyl, reapply the ...

   Time:

   Several Weekends

   Cost:

   $250 to $500

   Difficulty:

   Moderate to Hard

5. 5. How to Install Marine-Grade Light Fixtures

   

   0 Thumbs

   These step-by-step instructions show how to install marine-grade light fixtures with little or no metal exposed to the elements.

   Cost:

   $1 to $50

   Difficulty:

   Easy

6. 6. How to Repair a Chimney Flue Liner and Ash Dump

   1 Thumbs

   These easy step-by-step instructions demonstrate how to repair a chimney by fixing a hole in the flue liner and repairing an old ash du...

   Time:

   Day

   Cost:

   $1 to $50

   Difficulty:

   Easy to Moderate

7. 7. How to Repair Chimney Mortar

   1 Thumbs

   These step-by-step instructions prove how easy it is to repair a chimney hole and create a sloped crown in order to avoid water leakage...

   Time:

   Day

   Cost:

   $100 to $250

   Difficulty:

   Moderate

8. 8. How to Replace an Exhaust Fan

   0 Thumbs

   Home inspector Tim Hockenberry gives step-by-step instructions showing how to replace an old exhaust fan and install a new one.

   Cost:

   $1 to $50

   Difficulty:

   Easy

9. 9. How to Replace Missing Attic Insulation

   

   1 Thumbs

   If your home has a recurring mold problem it may help to add insulation in the attic. Learn how to install missing attic insulation wit...

   Cost:

   $1 to $50

   Difficulty:

   Easy

10. 10. How to Install a Timer on an Exhaust Fan

    

    1 Thumbs

    DIY experts show how to install a timer on an exhaust fan to help ward off mold.

    Cost:

    $1 to $50

    Difficulty:

    Moderate