DIY Network

DIY Network/Topics /

Woodworking

Top 100 Woodworking Projects

  1. 46. Top Screwdriver Picks (05:08)

    See which screwdrivers are best for home and automotive tasks.

  2. 47. The Basics on Cutting Dados

    Use this DIY Network guide to learn more about cutting dados.

  3. 48. Delta Planer (00:01:36)

    Check out this two-speed planer that smoothes lumber to desired thickness.

  4. 49. How to Make a Featherboard

    A featherboard applies pressure to the edge of a board while it is being run through a machine. Host David Thiel explains how to make a...

    Time:
    --
    Cost:
    $1 - $50
    Difficulty:
    Easy to Moderate
  5. 50. How to Cut Mortises With a Mortiser

    Making a mortise -- sometimes cut with a drill bit and finished with a chisel -- can be tough. With a mortiser the process is much simp...

    Time:
    --
    Cost:
    $1 - $50
    Difficulty:
    Easy to Moderate
  6. 51. Versatile Bookshelf - Part 2 (06:19)

    Adding veneer edge banding and assembling the bookshelf using dowels.

  7. 52. How to Make a Miter-Saw Measuring Block

    Making repetitive miter cuts isn't always easy. Use these step-by-step instructions and learn how this special jig can help make accura...

    Time:
    --
    Cost:
    $1 - $50
    Difficulty:
    Easy to Moderate
  8. 53. Tips for Using a Log Splitter

    DIY Tools and Techniques host David Thiel shares helpful tips and information on using a motorized log splitter.

  9. 54. The Orbiter & Drive 90 (00:00:52)

    Get into tight spaces to drill or drive screws with these accessories.

  10. 55. Dado Blade Basics

    The dado blade stack is actually a number of circular blades stacked atop one another to form a wide cutting area. Use this DIY Network...

  11. 56. 4- Table Saw Tricks (02:42)

    Using a table saw to cut accurate rabbets & grooves with one set-up.

  12. 57. Mortiser and Biscuit Joiner

    Cut two half-circles into two pieces of wood and slide a biscuit into them to make a strong joint. Learn how with these step-by-step in...

    Time:
    Under Half Day
    Cost:
    $100 - $250
    Difficulty:
    Moderate
  13. 58. How to Make a Straight Ball-Drilling Jig

    Drilling a straight hole into a wooden ball can be difficult. Use these step-by-step instructions to create a jig that'll make it easy ...

    Time:
    Under Half Day
    Cost:
    $1 - $50
    Difficulty:
    Hard
  14. 59. Build a Workshop Router Table (03:19)

    Build your own full-size router table that will fit any workshop space.

  15. 60. Pool Table (00:03:27)

    This old-style pool table was custom designed and built

DIY SOLUTIONS

Got a Problem?

Need help with a project? Got answers you'd like to share?

Post Problems & Get Answers

Advertisement

How-To Videos