DIY Network

Woodworking Video Projects

Woodworking Video

See dozens of woodworking and woodsculpting projects and techniques from start to finish.

Watch Now

Dovetail Techniques

Dovetail Woodworking Techniques

Learn how to use a dovetail machine to create a dovetail joint.

Learn How


How to Make a Jig for Curved Cuts

How to Make a Jig for Curved Cuts

Learn how to make this jig made of wiggle board that makes curved cuts in wood.

Get Started

DIY Network/Topics /

Woodworking

Top 100 Woodworking Projects

  1. 1. Fast Cap Glubot (00:00:57)

    This dispenser gets you out of some sticky situations with no drips.

  2. 2. Woodworking (20:00)

    Chris Grundy discovers cool woodworking tools and a fast-carving chisel.

  3. 3. Evolution Rage Circular Saw (00:01:36)

    Meet the first multipurpose circ saw - it cuts wood, aluminum and steel.

  4. 4. Lumber Wizard (00:01:31)

    Find out where the metal is in recovered lumber to avoid damaging tools.

  5. 5. Ultimate Wood Shop (04:42)

    Planning, equipping & organizing the ultimate workshop for woodworkers.

  6. 6. How to Adjust a Jointer

    Since a jointer is used for fine work, you must keep it finely tuned. Read on to learn how.

    Time:
    --
    Cost:
    --
    Difficulty:
    --
  7. 7. How to Make a Stopped Rabbet Cut

    Use these step-by-step instructions to make a stopped rabbet cut using a router table.

    Time:
    --
    Cost:
    $1 - $50
    Difficulty:
    Hard
  8. 8. Edge-Gluing Clamps

    Edge clamps act as an accessory to clamps. You can purchase them, or make them at home by following these steps.

    Time:
    --
    Cost:
    --
    Difficulty:
    --
  9. 9. How to Bend Wood

    Kerfs are grooves in a piece of wood cut by a saw. Kerfing involves bending a piece of wood by making equally spaced cuts.

    Time:
    --
    Cost:
    $1 - $50
    Difficulty:
    Easy
  10. 10. Versatile Bench Grinder (04:03)

    Check out the versatile bench grinder and its many uses in the workshop.

  11. 11. How to Make a Blind Rabbet Cut

    For the top of a cabinet, you would make a blind rabbet. In this cut, the rabbet is stopped on both ends.

    Time:
    --
    Cost:
    $1 - $50
    Difficulty:
    Hard
  12. 12. Kreg Klamp Table (00:57)

    This multifunction clamp table is perfect for woodworking applications.

  13. 13. Choosing the Best Paint Brush (03:52)

    From foam to bristle brushes, choose the right brush for the job.

  14. 14. Molly Brown Parlor Table (00:20:00)

    A reproduction parlor table reflects the spirit of the gutsy Molly Brown.

  15. 15. Custom Cabinets (20:01)

    A woodworking expert customizes plywood cabinet doors for this bathroom.

« Previous  123...67Next »

DIY SOLUTIONS

Got a Problem?

Need help with a project? Got answers you'd like to share?

Post Problems & Get Answers

Advertisement

How-To Videos