DIY Network

How To Utilize a Dust Barrier

Control sanding dust during DIY projects with plastic sheeting. This quick-setup ZipWall dust barrier is made for the job.

DIY Network/Topics /

Vacuums

Top 42 Vacuums Projects

  1. 1. Woodworking Garage (01:55)

    Woodworker Keith needs a place where he can build his custom furniture.

  2. 2. Mulch Vacuum

    DIY Network shares information about a tool that turns leaves into mulch. This mulch vacuum is a must-have for the eco-friendly gardene...

  3. 3. Bull Digger (01:12)

    Check out this post hole digger that makes the job unbelievably easy!

  4. 4. Ryobi One Plus Super Combo (00:02:43)

    Check out this combo kit with 5 tools, a charger and two Ni-Cad batteries.

  5. 5. Wet/Dry Vacs

    These handy canister vacuums can pick up wet and dry materials. Use this DIY guide to see which size vac works best for specific jobs.

  6. 6. V-Clamp (01:17)

    The V-Clamp uses compressed air to create a vacuum for clamping pieces.

  7. 7. Easy Glide Gtech AirRam Vac (00:01:23)

    The lightweight and cordless Gtech AirRam Vacuum glides easily over floors.

  8. 8. How to Make a Vacuum-Screening Ramp

    Use these step-by-step instructions to make a vacuum-screening ramp that will rid a workshop of hazardous sawdust. It sucks up small pi...

    Time:
    --
    Cost:
    $1 - $50
    Difficulty:
    Easy to Moderate
  9. 9. Billy Goat Multi-Vac (00:02:56)

    This lawn vacuum gobbles up leaves and just about anything out there.

  10. 10. Woods Powr-Grips (03:54)

    Check out these vacuum suction cup styled lifters for moving anything.

  11. 11. Milwaukee 28V Cordless Vacuum (01:28)

    This is a two-gallon vacuum and power blower, all in a cool toolbox design.

  12. 12. Vacuum Bed Hold-Down

    DIY experts explain why this portable, self-adjusting vacuum bed is a handy tool to have around the workshop.

  13. 13. DIY Air Quality (01:00)

    Here are the DIY Basics on air quality for do-it-yourselfers.

  14. 14. How to Make a Scroll-Saw Vacuum

    Dust can harm a scroll saw's motor bearings, as well as the user's eyes and nose. Here's how to make a vacuum accessory that'll keep sc...

    Time:
    --
    Cost:
    $1 - $50
    Difficulty:
    Easy
  15. 15. Install a Built-in Vacuum System -- Part II: Run the Pipe

    Host Paul Ryan demonstrates how to install the mainline pipe and use elbows and fittings to connect all of the inlet valves to the main...

    Time:
    Two Days
    Cost:
    $500 - $1,000
    Difficulty:
    Moderate
« Previous  123Next »

Advertisement