DIY Network

DIY Network/Topics /

Two Hour

Top 100 Two Hour Projects

  1. 91. How to Seal an Attic Duct

    Securing existing ductwork in the attic will help with eliminating dust in a house. Learn how to repair a leaking duct and seal it for ...

    Time:
    2 hours
    Cost:
    $1 - $50
    Difficulty:
    Easy
  2. 92. How to Install Kitchen Cabinets, Even Odd-Shaped

    DIY remodeling expert Paul Ryan shows how to measure for and install cabinets in this kitchen renovation, including corner sink cabinet...

    Time:
    2 hours
    Cost:
    $2,500 - $5,000
    Difficulty:
    Moderate to Hard
  3. 93. How to Mount a Wall-Hung Table

    This built-in table is a great option when there's no room for a conventional table.

    Time:
    2 hours
    Cost:
    $500 - $1,000
    Difficulty:
    Moderate
  4. 94. How to Make a Router Bit Storage Unit

    This four-sided unit will help keep router bits in order. It stores bits vertically, and a profile piece explains what each bit will do...

    Time:
    2 hours
    Cost:
    $1 - $50
    Difficulty:
    Easy
  5. 95. Tools for Veneering

    Veneer, a thin slice of wood used as a surface covering on a less expensive material such as engineered wood, puts the best face on a p...

    Time:
    2 hours
    Cost:
    $100 - $250
    Difficulty:
    Moderate to Hard
  6. 96. How to Install a Single-Handle Bathroom Faucet

    Installing a bathroom-sink faucet is similar to changing a kitchen faucet. The main difference is that the assembly for a lavatory-sink...

    Time:
    2 hours
    Cost:
    $100 - $250
    Difficulty:
    Moderate
  7. 97. How to Make a Temporary Work Table

    Learn how to use bar clamps to make a temporary work table. Host David Thiel also demonstrates how to use short bar clamps and 'C' clam...

    Time:
    2 hours
    Cost:
    $1 - $50
    Difficulty:
    Easy
  8. 98. How To Check and Re-Caulk Flashing

    Maintenance tips for wall, chimney and plumbing vents.

    Time:
    2 hours
    Cost:
    $1 - $50
    Difficulty:
    Easy
  9. 99. How To Cut a Lock Joint

    Follow these steps to make a lock joint.

    Time:
    2 hours
    Cost:
    $100 - $250
    Difficulty:
    Moderate to Hard
  10. 100. How to Make a Butcher-Block Cutting Board

    A small drop of butcher-block material from an undermount sink cut-out is repurposed as a new oversized cutting board.

    Time:
    2 hours
    Cost:
    $1 - $50
    Difficulty:
    Easy
« Previous12...567  Next »

Advertisement