DIY Network

DIY Network/Topics /

Two Hour

Top 100 Two Hour Projects

  1. 31. How To Make Resin Casting

    One of the best ways to hold onto treasured keepsakes forever is to mold them in a resin cast.

    Time:
    2 hours
    Cost:
    $1 - $50
    Difficulty:
    Easy
  2. 32. How to Veneer Molding

    Veneering on a curved surface can be a difficult process without the right tool. Here's an easy method for using a vacuum pressing syst...

    Time:
    2 hours
    Cost:
    $1 - $50
    Difficulty:
    Easy
  3. 33. How to Cut Bendable Plywood Panels

    Bendable plywood -- in which the grain of the layered wood veneers is laid in the same direction -- can be used to make unique pieces. ...

    Time:
    2 hours
    Cost:
    $1 - $50
    Difficulty:
    Easy
  4. 34. How to Replace an Electrical Outlet Receptacle

    At Disaster House, we invited heavy-metal rock band Slaughter to overload our electrical system. We had the band to hook up all of thei...

    Time:
    2 hours
    Cost:
    $1 - $50
    Difficulty:
    Moderate to Hard
  5. 35. Halloween Pumpkin Carving: Tiki Jack O' Lantern

    Decorate for Halloween by learning how to carve a tiki pumpkin.

    Time:
    2 hours
    Cost:
    $1 - $50
    Difficulty:
    Easy
  6. 36. Fiesta Family Room: Finials

    For an older look, the finials get a silver spray paint and crumpled newspaper treatment.

    Time:
    2 hours
    Cost:
    $1 - $50
    Difficulty:
    Easy
  7. 37. How to Use a Yard Trencher

    A yard trencher can dig out a trench for conduit or water pipes in the yard. It makes a thin trench in the yard without disturbing the ...

    Time:
    2 hours
    Cost:
    $100 - $250
    Difficulty:
    Moderate
  8. 38. How to Drain a Water Heater

    Most people never give their water heater a second thought — until it stops working. One thing you can do to extend the life of h...

    Time:
    2 hours
    Cost:
    $1 - $50
    Difficulty:
    Easy to Moderate
  9. 39. How to Install a Sink and Seal Seams in a New Slate Countertop

    DIY remodeling expert Paul Ryan shows the proper way to install a sink and natural slate countertop.

    Time:
    2 hours
    Cost:
    $50 - $100
    Difficulty:
    Moderate
  10. 40. How to Change a Doorknob

    Follow these easy step-by-step instructions to replace a doorknob.

    Time:
    2 hours
    Cost:
    $1 - $50
    Difficulty:
    Easy
  11. 41. How To Check and Re-Caulk Flashing

    Maintenance tips for wall, chimney and plumbing vents.

    Time:
    2 hours
    Cost:
    $1 - $50
    Difficulty:
    Easy
  12. 42. How to Install a High-Arc Faucet

    Use these step-by-step instructions to install a gleaming new kitchen faucet and strain basket.

    Time:
    2 hours
    Cost:
    $100 - $250
    Difficulty:
    Easy to Moderate
  13. 43. How to Make a Tabletop Disassembly Jig

    When you're pulling apart a piece of furniture, it's hard not to damage the wood or the finish. Here's how to make a special jig that c...

    Time:
    2 hours
    Cost:
    $1 - $50
    Difficulty:
    Easy to Moderate
  14. 44. Safety Precautions for Chemical Strippers

    Learn the proper techniques and materials needed to safely remove old finishes from wooden furniture and antiques.

    Time:
    2 hours
    Cost:
    $1 - $50
    Difficulty:
    Easy to Moderate
  15. 45. Replace a Bathroom Light Fixture

    A new light fixture can make a dramatic difference in a bath, and it’s an easy and inexpensive how-to project.

    Time:
    2 hours
    Cost:
    $1 - $50
    Difficulty:
    Easy

Advertisement