DIY Network

DIY Network/Topics /

Trim And Molding

Top 73 Trim And Molding Projects

  1. 61. How to Add Molding and Paint to a Murphy Bed

    DIY Network experts show how to add decorative detail to a Murphy bed by adding molding and paint.

    Time:
    Weekend
    Cost:
    $250 - $500
    Difficulty:
    Moderate
  2. 62. How to Add Rope Lighting to Crown Molding

    Use these step-by-step instructions to easily install rope lights and brighten any room in the house.

    Time:
    Under Half Day
    Cost:
    $1 - $50
    Difficulty:
    Easy
  3. 63. How to Cope and Install Baseboard

    Learn how to use a coping saw to get the tightest baseboard corners.

    Time:
    Day
    Cost:
    $100 - $250
    Difficulty:
    Moderate
  4. 64. Floor Care Tips and How to Install Base Molding

    Hosts Jay Baker and Scott Branscom give tips on floor care and show how to install base molding for laminate floors.

    Time:
    Day
    Cost:
    $250 - $500
    Difficulty:
    Moderate
  5. 65. How to Create Molding on a Radial-Arm Saw

    The radial-arm saw is often used to cut molding, but it can also be used to shape molding. The technique, however, is for experts only.

    Time:
    2 hours
    Cost:
    $500 - $1,000
    Difficulty:
    Moderate to Hard
  6. 66. How to Install Tin Crown Molding

    Here's how to finish a tin ceiling with tin crown molding.

    Time:
    Under Half Day
    Cost:
    $100 - $250
    Difficulty:
    Moderate to Hard
  7. 67. How to Match Molding Profiles

    It can be hard to match molding profiles -- especially when working on an older home. DIY experts how to use a router to create and mat...

    Time:
    --
    Cost:
    $1 - $50
    Difficulty:
    Moderate
  8. 68. All About Moldings

    DIY Network explains the different types of molding found in a typical home.

  9. 69. How to Create and Install Trim Accents

    Door trim is installed between a plinth block that sits on the floor and a rosette that defines the top of the trim. These pieces can b...

    Time:
    Under Half Day
    Cost:
    $100 - $250
    Difficulty:
    Moderate to Hard
  10. 70. How to Create Built-Up Molding

    Creating built-up molding allows you to create any profile you wish by simply combining several existing standard molding styles.

    Time:
    Weekend
    Cost:
    $100 - $250
    Difficulty:
    Hard
  11. 71. How to Disguise Nail and Screw Holes in Molding

    Learn how to cover and plug nails and screws holes in decorative molding.

    Time:
    --
    Cost:
    --
    Difficulty:
    --
  12. 72. How to Prep Walls and Trim

    Learn skills for prepping a wall before painting to give an interior paint job a professional look.

    Time:
    Two Days
    Cost:
    $100 - $250
    Difficulty:
    Moderate
  13. 73. How to Create Paneled Walls

    Add panel molding to your walls to create a sophisticated look.

    Time:
    Weekend
    Cost:
    $250 - $500
    Difficulty:
    Moderate to Hard
« Previous12345  Next »

Advertisement