DIY Network

DIY Network/Topics /

Trim And Molding

Top 73 Trim And Molding Projects

  1. 46. Step 4: Finish the Project (00:43)

    How to prep crown molding for paint.

  2. 47. How to Create Built-Up Molding

    Creating built-up molding allows you to create any profile you wish by simply combining several existing standard molding styles.

    Time:
    Weekend
    Cost:
    $100 - $250
    Difficulty:
    Hard
  3. 48. How to Install Beadboard and Trim

    Host Fuad Reveiz shows how to transform an ordinary bathroom into an eye-catching space by painting, adding some beadboard and new fixt...

    Time:
    Weekend
    Cost:
    $250 - $500
    Difficulty:
    Moderate
  4. 49. How to Create Molding on a Radial-Arm Saw

    The radial-arm saw is often used to cut molding, but it can also be used to shape molding. The technique, however, is for experts only.

    Time:
    2 hours
    Cost:
    $500 - $1,000
    Difficulty:
    Moderate to Hard
  5. 50. Popcorn Ceiling and Wall Repair

    Experts demonstrate how to remove a popcorn ceiling and repair any resulting damage to the ceiling, molding or walls.

    Time:
    --
    Cost:
    --
    Difficulty:
    Moderate to Hard
  6. 51. How to Create a Fireplace Mantel

    A new fireplace mantel can brighten up an entire room. This project uses standard lumber and crown molding to create a fresh new look.

    Time:
    Under Half Day
    Cost:
    $250 - $500
    Difficulty:
    Moderate
  7. 52. Custom Details on a Budget (00:01:00)

    Here are several ways to have custom details without the custom price tag.

  8. 53. Floor Care Tips and How to Install Base Molding

    Hosts Jay Baker and Scott Branscom give tips on floor care and show how to install base molding for laminate floors.

    Time:
    Day
    Cost:
    $250 - $500
    Difficulty:
    Moderate
  9. 54. How to Veneer Molding

    Veneering on a curved surface can be a difficult process without the right tool. Here's an easy method for using a vacuum pressing syst...

    Time:
    2 hours
    Cost:
    $1 - $50
    Difficulty:
    Easy
  10. 55. How to Add Decorative Molding on Top of Baseboard

    Spruce up old baseboards by adding decorate trim or quarter-round molding to the top of them.

    Time:
    --
    Cost:
    --
    Difficulty:
    --
  11. 56. How to Cut Grooves in Wall Molding

    Shaper table-saw blades are available in a variety of shapes and styles. These blades allow the user to cut decorative profiles in wood...

    Time:
    Under Half Day
    Cost:
    $500 - $1,000
    Difficulty:
    Moderate to Hard
  12. 57. Learn the Basics About Baseboard Joints

    The DIY Network experts explain basic terminology and info about baseboards.

  13. 58. All About Moldings

    DIY Network explains the different types of molding found in a typical home.

  14. 59. How to Disguise Nail and Screw Holes in Molding

    Learn how to cover and plug nails and screws holes in decorative molding.

    Time:
    --
    Cost:
    --
    Difficulty:
    --
  15. 60. How to Install Crown Molding in a Weekend

    Crown molding will enhance the look of any room and it can be installed in a weekend.

    Time:
    Weekend
    Cost:
    $250 - $500
    Difficulty:
    Hard

Advertisement