DIY Network

DIY Network/Topics /

Trim And Molding

Top 73 Trim And Molding Projects

  1. 16. How to Install a Chair Rail

    A chair rail is an elegant way to add a finished look and a warm feel to any room.

    Time:
    Under Half Day
    Cost:
    $100 - $250
    Difficulty:
    Easy to Moderate
  2. 17. Painting Basics

    Got a painting project on your to-do list? Learn these DIY painting tips to ensure the project goes smoothly and looks great.

  3. 18. Trim Routers

    DIY explains why the trim router has become a workshop staple.

  4. 19. How to Create and Install Trim Accents

    Door trim is installed between a plinth block that sits on the floor and a rosette that defines the top of the trim. These pieces can b...

    Time:
    Under Half Day
    Cost:
    $100 - $250
    Difficulty:
    Moderate to Hard
  5. 20. How to Add Aesthetic Appeal to a Shelving Unit

    The DIY to the Rescue team adds the finishing touches to tiered shelving units.

    Time:
    Under Half Day
    Cost:
    $50 - $100
    Difficulty:
    Easy to Moderate
  6. 21. How to Restore Victorian Features

    Restoration Realities shows how to restore an old center hall, demolish an added closet, patch old plaster and bring back original unde...

    Time:
    --
    Cost:
    --
    Difficulty:
    Hard
  7. 22. How to Install a Picture Rail

    Follow these steps to install a picture rail for a unique way to hang artwork around a room.

    Time:
    2 hours
    Cost:
    $1 - $50
    Difficulty:
    Easy
  8. 23. Learn the Basics About Baseboard Joints

    The DIY Network experts explain basic terminology and info about baseboards.

  9. 24. How to Create Molding on a Radial-Arm Saw

    The radial-arm saw is often used to cut molding, but it can also be used to shape molding. The technique, however, is for experts only.

    Time:
    2 hours
    Cost:
    $500 - $1,000
    Difficulty:
    Moderate to Hard
  10. 25. How to Add Custom Trim to Kitchen Cabinets

    Installing custom trim (also known as shoe molding) at the bottom of cabinets is a great way to add a high-end look to any room. Learn ...

    Time:
    Day
    Cost:
    $250 - $500
    Difficulty:
    Easy to Moderate
  11. 26. How to Create Paneled Walls

    Add panel molding to your walls to create a sophisticated look.

    Time:
    Weekend
    Cost:
    $250 - $500
    Difficulty:
    Moderate to Hard
  12. 27. How to Cut Grooves in Wall Molding

    Shaper table-saw blades are available in a variety of shapes and styles. These blades allow the user to cut decorative profiles in wood...

    Time:
    Under Half Day
    Cost:
    $500 - $1,000
    Difficulty:
    Moderate to Hard
  13. 28. Step 2: Corners (04:26)

    How to cut inside and outside corners for crown molding.

  14. 29. Trim Carpentry (03:56)

    Three trim carpenters compete to build huge entertainment centers.

  15. 30. How to Create a Fireplace Mantel

    A new fireplace mantel can brighten up an entire room. This project uses standard lumber and crown molding to create a fresh new look.

    Time:
    Under Half Day
    Cost:
    $250 - $500
    Difficulty:
    Moderate

Advertisement