DIY Network

How to Match Molding Profiles

It can be hard to match molding profiles -- especially when working on an older home. DIY experts how to use a router to create and mat...

DIY Network/Topics /

Trim And Molding

Top 73 Trim And Molding Projects

  1. 1. All About Molding and Decorative Woodwork

    DIY Network explains the different types of wood moldings and baseboard.

  2. 2. How to Create Built-Up Molding

    Creating built-up molding allows you to create any profile you wish by simply combining several existing standard molding styles.

    Time:
    Weekend
    Cost:
    $100 - $250
    Difficulty:
    Hard
  3. 3. Step 1: Measure the Room (01:28)

    How to choose the correct crown molding and measure for linear footage.

  4. 4. Step 2: Corners (04:26)

    How to cut inside and outside corners for crown molding.

  5. 5. How to Add Molding and Paint to a Murphy Bed

    DIY Network experts show how to add decorative detail to a Murphy bed by adding molding and paint.

    Time:
    Weekend
    Cost:
    $250 - $500
    Difficulty:
    Moderate
  6. 6. How to Create and Install Trim Accents

    Door trim is installed between a plinth block that sits on the floor and a rosette that defines the top of the trim. These pieces can b...

    Time:
    Under Half Day
    Cost:
    $100 - $250
    Difficulty:
    Moderate to Hard
  7. 7. How to Veneer Molding

    Veneering on a curved surface can be a difficult process without the right tool. Here's an easy method for using a vacuum pressing syst...

    Time:
    2 hours
    Cost:
    $1 - $50
    Difficulty:
    Easy
  8. 8. How to Repair Crown Molding

    These step-by-step instructions demonstrate how to remove and replace crown molding as part of a ceiling repair.

    Time:
    Day
    Cost:
    $50 - $100
    Difficulty:
    Easy to Moderate
  9. 9. How to Add Trim and Cabinet Doors

    Learn how to add hanging cabinet doors on a recessed shelf with these easy step-by-step directions.

    Time:
    Weekend
    Cost:
    $50 - $100
    Difficulty:
    Easy to Moderate
  10. 10. How to Remove Trim, Flooring and Appliances

    DIY remodeling expert Paul Ryan shows an effective way to remove trim, old floor, backsplashes and appliances en route to an authentic ...

    Time:
    Day
    Cost:
    $1 - $50
    Difficulty:
    Easy
  11. 11. Step 3: Hang the Crown Molding (03:53)

    How to hang crown molding.

  12. 12. How to Create Molding on a Radial-Arm Saw

    The radial-arm saw is often used to cut molding, but it can also be used to shape molding. The technique, however, is for experts only.

    Time:
    2 hours
    Cost:
    $500 - $1,000
    Difficulty:
    Moderate to Hard
  13. 13. How to Install Countertop and Trim, Paint and Hang Lights

    Installing a new countertop can add a great look and functionality to a room. Learn how to install a new countertop and trim, as well a...

    Time:
    Under Half Day
    Cost:
    $250 - $500
    Difficulty:
    Moderate
  14. 14. How to Install Crown Molding

    Install crown molding with professional results, adding visual interest and value to your home, with these step-by-step instructions.

    Time:
    Weekend
    Cost:
    $250 - $500
    Difficulty:
    Hard
  15. 15. How to Install Crown Molding in a Kitchen

    Crown molding is a great and simple way to improve the look of a room. Learn how to install crown molding in a kitchen.

    Time:
    Weekend
    Cost:
    $500 - $1,000
    Difficulty:
    Hard
« Previous  12345Next »

Advertisement