DIY Network

DIY Network/Topics /

Table Saws

Top 81 Table Saws Projects

  1. 31. How to Make a Miter Fence Extension and Stop Block

    The miter gauge that comes with most table saws isn't long enough to cut long boards. Add a miter fence extension and stop block to inc...

    Time:
    --
    Cost:
    $1 - $50
    Difficulty:
    Easy
  2. 32. Multi-Tool (20:00)

    Chris shows us tools that can take on a multitude of tasks.

  3. 33. Using a Crosscut Jig

    DIY host David Thiel explains tips for adding a crosscut table in order to cut large pieces of plywood.

  4. 34. Powermatic PM 2000 (01:22)

    This top-of-the-line table saw has retractable casters for mobility.

  5. 35. Dado Blade Basics

    The dado blade stack is actually a number of circular blades stacked atop one another to form a wide cutting area. Use this DIY Network...

  6. 36. 2- Kerf Cuts (05:43)

    Using the table saw to make kerf cuts for creative projects.

  7. 37. How to Adjust a Table Saw

    The table saw is one of the most commonly used -- and misused -- tools in a workshop. Here's how to align a table saw so cuts are alway...

    Time:
    --
    Cost:
    $1 - $50
    Difficulty:
    Easy
  8. 38. How To Cut a Blind Dado

    Follow these steps for cutting a blind dado using a table saw.

    Time:
    Under Half Day
    Cost:
    $100 - $250
    Difficulty:
    Hard
  9. 39. Table Saw Splitter Upgrade (04:08)

    Reduce the potential for kickback by adding an aftermarket splitter.

  10. 40. Problem Solvers (20:00)

    Chris reveals some creative solutions to solve your problems.

  11. 41. Adjustable Outfeed Table (04:53)

    Build your own out-feed extension table suitable for use with a table saw.

  12. 42. How to Add a Splitter to a Table Saw

    A simple plastic splitter can be installed to a zero clearance throat plate to make your table saw safer to use. Learn how to reduce th...

    Time:
    --
    Cost:
    $1 - $50
    Difficulty:
    Moderate
  13. 43. Easy Table Saw Maintenance (04:44)

    Keep your table saw in tiptop shape with these maintenance tips.

  14. 44. How to Make a Plywood Springboard for a Rolling Outfeed Table

    An outfeed accessory is vital when working with long boards on a table tool such as a table saw or a jointer. This plywood support will...

    Time:
    --
    Cost:
    $1 - $50
    Difficulty:
    Easy to Moderate
  15. 45. Innovative Table Saw

    Guest David Flanning with SawStop joins host David Thiel to reveal one of the newest technologies in saw safety; a blade that stops bef...

Advertisement