DIY Network

DIY Network/Topics /

Table Saws

Top 81 Table Saws Projects

  1. 16. Mechanic's Tools to Have in the Workshop

    DIY Network experts explain how some automotive tools can be handy to have around the workshop.

  2. 17. Best Table Saw Guards (04:43)

    Upgrade your workshop safety by installing an table saw guard.

  3. 18. TS 3000 Gravity Rise Saw (01:02)

    The TS3000, a stand on wheels, puts your table saw on the move with ease.

  4. 19. Ultimate Wood Shop (04:42)

    Planning, equipping & organizing the ultimate workshop for woodworkers.

  5. 20. How to Set Up a Molding Cutter

    A molding cutter can create a variety of molding profiles on a table saw. Use these step-by-step instructions to easily set up a moldin...

    Time:
    --
    Cost:
    $100 - $250
    Difficulty:
    Moderate to Hard
  6. 21. Table Saw Splitter Upgrade (04:08)

    Reduce the potential for kickback by adding an aftermarket splitter.

  7. 22. How to Square Wood on a Table Saw

    Cutting the ends of two boards that have been joined together to create an even edge isn't always easy. Here, DIY experts demonstrate h...

    Time:
    --
    Cost:
    $1 - $50
    Difficulty:
    Easy to Moderate
  8. 23. How to Make Quartersawn Lumber on a Table Saw

    Quartersawn wood is more stable lumber than plain sawn, and you can cut quartersawn wood out of scraps of plain sawn wood you already h...

    Time:
    Under Half Day
    Cost:
    $1 - $50
    Difficulty:
    Moderate
  9. 24. How to Make a Push Block

    Push blocks and push sticks are invaluable tools for the table saw and joiner. These accessories help keep your hands away from the bla...

    Time:
    --
    Cost:
    $1 - $50
    Difficulty:
    Easy
  10. 25. How to Cut Coves on a Table Saw

    Cutting coves is usually completed on a shaper, but with a few pointers from DIY experts, cove cuts can be made on a table saw.

    Time:
    2 hours
    Cost:
    $500 - $1,000
    Difficulty:
    Moderate to Hard
  11. 26. The Basics on Cutting Dados

    Use this DIY Network guide to learn more about cutting dados.

  12. 27. How to Adjust a Table Saw

    The table saw is one of the most commonly used -- and misused -- tools in a workshop. Here's how to align a table saw so cuts are alway...

    Time:
    --
    Cost:
    $1 - $50
    Difficulty:
    Easy
  13. 28. How to Use a Table Saw as an Edge Jointer

    Learn how -- then teach -- an old table saw how to do a few new tricks. It's easy to turn a table saw into an edge jointer with these i...

    Time:
    --
    Cost:
    $1 - $50
    Difficulty:
    Easy
  14. 29. Venturi-Box Dust Catcher

    Combined with your shop vac, this homemade box gives you a great way to collect dust and keep your workshop clean.

    Time:
    --
    Cost:
    $1 - $50
    Difficulty:
    Easy
  15. 30. Using a Roller Stand and Outfeed Table

    DIY experts offer tips on creating a support system for long pieces of wood.

Advertisement