DIY Network

How to Square Wood on a Table Saw

Cutting the ends of two boards that have been joined together to create an even edge isn't always easy. Here, DIY experts demonstrate h...

DIY Network/Topics /

Table Saws

Top 81 Table Saws Projects

  1. 1. Using a Micro-Adjustable Miter Gauge

    DIY host David Thiel demonstrates a commercially available micro-adjustable miter gauge that increases the accuracy and fit of miter cu...

  2. 2. TS 3000 Gravity Rise Saw (01:02)

    The TS3000, a stand on wheels, puts your table saw on the move with ease.

  3. 3. Sawstop (00:03:35)

    Check out this extra-safe table saw designed to help you keep your digits.

  4. 4. Innovative Table Saw

    Guest David Flanning with SawStop joins host David Thiel to reveal one of the newest technologies in saw safety; a blade that stops bef...

  5. 5. Shop Multipurpose Tool

    DIY Network shows how the homeowners and workshop enthusiasts can use the shop multi-tool. See how this multipurpose tool's attachments...

  6. 6. How to Cut and Rip Boards and Plywood

    Before cutting and ripping large boards or sheets of plywood, know the proper table saw technique. Use these step-by-step instructions ...

    Time:
    2 hours
    Cost:
    $1 - $50
    Difficulty:
    Easy
  7. 7. How to Make a Wooden Bowl

    A guide that makes a table saw's blade contact only the center portion of a cylindrical piece of wood will create a dished effect. Thes...

    Time:
    --
    Cost:
    $1 - $50
    Difficulty:
    Hard
  8. 8. How to Make Quartersawn Lumber on a Table Saw

    Quartersawn wood is more stable lumber than plain sawn, and you can cut quartersawn wood out of scraps of plain sawn wood you already h...

    Time:
    Under Half Day
    Cost:
    $1 - $50
    Difficulty:
    Moderate
  9. 9. 2- Kerf Cuts (05:43)

    Using the table saw to make kerf cuts for creative projects.

  10. 10. Two-Faced Miter Gauge

    DIY Cool Tools and Techniques host David Thiel discusses a very special miter gauge to complement a table saw.

  11. 11. How to Make Fluted Panels on a Table Saw

    Use a table saw to make intricate cuts on wood. A special jig makes it fairly easy to create fluted panel cuts with a table saw.

    Time:
    --
    Cost:
    $1 - $50
    Difficulty:
    Easy to Moderate
  12. 12. Power, Tunes, & Clean (03:03)

    Check out Cool Tools' top 5 best tool picks for 2007!

  13. 13. How To Cut a Blind Dado

    Follow these steps for cutting a blind dado using a table saw.

    Time:
    Under Half Day
    Cost:
    $100 - $250
    Difficulty:
    Hard
  14. 14. Dewalt Track Saw (01:43)

    Introducing a 12-pound portable saw that runs on a track.

  15. 15. Adjustable Outfeed Table (04:53)

    Build your own out-feed extension table suitable for use with a table saw.

« Previous  123...56Next »

Advertisement