DIY Network

How to Make a Table Saw Accessory Rack

This useful table saw accessory rack mounts between the motor section and the base of the contractor saw. The rack has two accessory bo...

DIY Network/Topics /

Table Saws

Top 81 Table Saws Projects

  1. 1. Compact Table Saw (01:57)

    The features on this portable saw make light work of your home projects.

  2. 2. Dado Blade Basics

    The dado blade stack is actually a number of circular blades stacked atop one another to form a wide cutting area. Use this DIY Network...

  3. 3. Using a Micro-Adjustable Miter Gauge

    DIY host David Thiel demonstrates a commercially available micro-adjustable miter gauge that increases the accuracy and fit of miter cu...

  4. 4. The Top 3 Bench Tools for Your Workshop

    DIY Network talks about the basic bench tools for outfitting a home workshop.

  5. 5. How to Cut and Rip Boards and Plywood

    Before cutting and ripping large boards or sheets of plywood, know the proper table saw technique. Use these step-by-step instructions ...

    Time:
    2 hours
    Cost:
    $1 - $50
    Difficulty:
    Easy
  6. 6. How to Make a Fence-Straddling Jig

    A homemade push-stick can help keep fingers away from the blade on a table saw. Use these instructions to easily make a stick that fits...

    Time:
    --
    Cost:
    $1 - $50
    Difficulty:
    Easy
  7. 7. How to Make an Adjustable Outfeed Table

    Use these step-by-step instructions to make an adjustable outfeed table that mounts on a portable workbench. Place the table next to th...

    Time:
    --
    Cost:
    $1 - $50
    Difficulty:
    Easy
  8. 8. Table Saw Blade Changing Tool (01:35)

    This double-duty tool removes a saw blade and is a handy storage case, too.

  9. 9. How To Cut a Lock Joint

    Follow these steps to make a lock joint.

    Time:
    2 hours
    Cost:
    $100 - $250
    Difficulty:
    Moderate to Hard
  10. 10. Power, Tunes, & Clean (03:03)

    Check out Cool Tools' top 5 best tool picks for 2007!

  11. 11. Using a Crosscut Jig

    DIY host David Thiel explains tips for adding a crosscut table in order to cut large pieces of plywood.

  12. 12. Table Saw Splitter Upgrade (04:08)

    Reduce the potential for kickback by adding an aftermarket splitter.

  13. 13. How to Use a Table Saw as an Edge Jointer

    Learn how -- then teach -- an old table saw how to do a few new tricks. It's easy to turn a table saw into an edge jointer with these i...

    Time:
    --
    Cost:
    $1 - $50
    Difficulty:
    Easy
  14. 14. How to Make Fluted Panels on a Table Saw

    Use a table saw to make intricate cuts on wood. A special jig makes it fairly easy to create fluted panel cuts with a table saw.

    Time:
    --
    Cost:
    $1 - $50
    Difficulty:
    Easy to Moderate
  15. 15. Types of Push Sticks

    DIY experts show how push sticks and push blocks are necessary tools for the table saw and joiner. They act as extensions for your hand...

« Previous  123...56Next »

Advertisement