Top 100 Saws Projects

1. 1. Two-Faced Miter Gauge

   DIY Cool Tools and Techniques host David Thiel discusses a very special miter gauge to complement a table saw.

2. 2. The Basics on Hand-Held Saws

   With a variety of hand-held saws on the market, it's hard to know which to choose. DIY Network makes it easy to find the...

3. 3. Circular-Saw Basics

   DIY experts offer tips on choosing the right circular saw for any job. Byline:

4. 4. Retractable Hand Saw

   The DIY Network shows you a line of very useful utility cutters with retractable blades.

5. 5. Mini Reciprocating Saw

   This reciprocating saw can do straight, miter and flush cuts and attaches to any work surface. Read about it here at DIY...

6. 6. How to Join Boards With a Circular Saw

   Be the First

   A jointer isn't the only way to join two boards. Here's one way to accomplish the task with a circular saw.

   Time:

   --

   Cost:

   $1 - $50

   Difficulty:

   Easy

7. 7. Circular Saw Guide

   The DIY Network shows you a product that serves as both a guide and a stop for a circular saw.

8. 8. How to Make a Featherboard

   

   Be the First

   A featherboard applies pressure to the edge of a board while it is being run through a machine. Host David Thiel explain...

   Time:

   --

   Cost:

   $1 - $50

   Difficulty:

   Easy to Moderate

9. 9. Industrial Strength: Specialty Cutting Tools

   DIY host David Thiel learns how a CNC (Computer Numerically Controlled) router and a bridge saw work together to create ...

10. 10. Miniature Table Saw Basics

    Miniature table saws work just like a regular-size table saw — but without the added bulk. See why this mini tool ...

11. 11. Tips on Using Cutting Guides

    DIY Network host Paul Ryan demonstrates some cutting guides that make it easy to get the perfect cut.

12. 12. How to Set Up a Molding Cutter

    

    1 Thumbs

    A molding cutter can create a variety of molding profiles on a table saw. Use these step-by-step instructions to easily ...

    Time:

    --

    Cost:

    $100 - $250

    Difficulty:

    Moderate to Hard

13. 13. How to Cut Coves on a Table Saw

    Be the First

    Cutting coves is usually completed on a shaper, but with a few pointers from DIY experts, cove cuts can be made on a tab...

    Time:

    2 hours

    Cost:

    $500 - $1,000

    Difficulty:

    Moderate to Hard

14. 14. Echo CS-370 Chain Saw (03:01)

    

    Take a tour to see how chainsaws are made at the factory in Illinois.

15. 15. How to Make Faux Raised-Panel Cuts

    

    Be the First

    A panel-saw table can be used with a lot more than just a panel saw. Use these instructions to see how -- with the help ...

    Time:

    --

    Cost:

    $1 - $50

    Difficulty:

    Easy