DIY Network

DIY Network/Topics /

Routers

Top 87 Routers Projects

  1. 76. Hoffmann Dovetail Router (01:32)

    This router is equipped with a high-speed motor and a 45-degree fenceplate.

  2. 77. The Basics on Cutting Dados

    Use this DIY Network guide to learn more about cutting dados.

  3. 78. How to Use a Laminate Trimmer

    A laminate trimmer is a small router that is most often used for trimming laminate, but can be used in many woodworking projects. Learn...

    Time:
    --
    Cost:
    $1 - $50
    Difficulty:
    Easy
  4. 79. How To Cut Tongue-and-Groove Joints

    Tongue-and-groove joints are commonly made on a table saw. But with the right bits, the joints can be made just as easily on a router t...

    Time:
    Under Half Day
    Cost:
    $100 - $250
    Difficulty:
    Moderate to Hard
  5. 80. How to Enlarge a Hole

    Have you ever had to throw out expensive stock because the holes that were cut in it turned out to be too small? Host David Thiel demon...

    Time:
    --
    Cost:
    $1 - $50
    Difficulty:
    Easy to Moderate
  6. 81. Caring for Your Router Bits (04:25)

    With simple preventative maintenance, keep router bits in great shape.

  7. 82. Router in Slo-Mo (00:00:31)

    A 30-second slow-motion demonstration of a router at work.

  8. 83. How to Make Faux Raised-Panel Cuts

    A panel-saw table can be used with a lot more than just a panel saw. Use these instructions to see how -- with the help of a plunge rou...

    Time:
    --
    Cost:
    $1 - $50
    Difficulty:
    Easy
  9. 84. How to Make a Router Bit Storage Case

    This storage case is a simple box with four drawers. Some of the drawers have holes cut inside to hold router bits; the others are regu...

    Time:
    2 hours
    Cost:
    $1 - $50
    Difficulty:
    Easy
  10. 85. How to Make a Router Bit Storage Unit

    This four-sided unit will help keep router bits in order. It stores bits vertically, and a profile piece explains what each bit will do...

    Time:
    2 hours
    Cost:
    $1 - $50
    Difficulty:
    Easy
  11. 86. How to Make a Clear Sub-Base

    One of the biggest challenges when using a router is actually seeing the work piece beneath the base. Replacing a router’s stock ...

    Time:
    --
    Cost:
    $1 - $50
    Difficulty:
    Easy
  12. 87. Dremel Trio (01:05)

    The Dremel Trio is a sander, a router and a drill, all in one.

« Previous12...456  Next »

Advertisement