DIY Network

DIY Network/Topics /

Routers

Top 87 Routers Projects

  1. 61. Storing Blades and Bits

    In order to keep bits, blades and other accessories from being lost, damaged or dulled, it's important that they be stored properly. DI...

  2. 62. Bookcase (03:46)

    Marc Bartolomeo shows how to frame and assemble a custom bookcase.

  3. 63. How To Use a Radius-Cutting Jig

    The jig cuts perfect radii with a router using a swinging arm.

    Time:
    Under Half Day
    Cost:
    $100 - $250
    Difficulty:
    Hard
  4. 64. Laminate Overlay (00:02:31)

    Laminate overlay adds a contemporary finish to dated cabinet doors.

  5. 65. How to Make a Jig for Cutting Dado Joints

    Routing dado joints can be a nuisance when making several at a time. This simple homemade jig can make the job easier and more accurate...

    Time:
    --
    Cost:
    $1 - $50
    Difficulty:
    Easy
  6. 66. Skil X-Bench (01:32)

    This strong, portable worktable changes to accommodate multiple uses.

  7. 67. How to Cut Circles and Curves With a Router

    Learn how to use a router and a special jig to cut perfect circles and ovals.

    Time:
    Under Half Day
    Cost:
    $1 - $50
    Difficulty:
    Moderate to Hard
  8. 68. 1- Router Techniques (06:21)

    David Thiel demonstrates basic techniques for using plunge & table routers.

  9. 69. Dremel Trio (01:05)

    The Dremel Trio is a sander, a router and a drill, all in one.

  10. 70. Routing Fingernail Edges

    By attaching a jig to a router table, round-over bits can be used to create fingernail edges on tabletops or bookshelves. Here's how to...

    Time:
    Day
    Cost:
    $1 - $50
    Difficulty:
    Moderate to Hard
  11. 71. How To Maintain a Router

    Routine maintenance is key in keeping a router in peak condition. Follow these steps to keep a router working properly.

    Time:
    Under Half Day
    Cost:
    $1 - $50
    Difficulty:
    Moderate
  12. 72. Radius Router Jig (02:57)

    Building a jig for making radius cuts & profiles with a plunge router.

  13. 73. How to Make a Clear Sub-Base

    One of the biggest challenges when using a router is actually seeing the work piece beneath the base. Replacing a router’s stock ...

    Time:
    --
    Cost:
    $1 - $50
    Difficulty:
    Easy
  14. 74. How to Make Faux Raised-Panel Cuts

    A panel-saw table can be used with a lot more than just a panel saw. Use these instructions to see how -- with the help of a plunge rou...

    Time:
    --
    Cost:
    $1 - $50
    Difficulty:
    Easy
  15. 75. The Essential Power Tools

    There are few things that feel more empowering for the do-it-yourselfer than power tools. DIY Network offers a list of useful power too...

Advertisement