DIY Network

DIY Network/Topics /

Routers

Top 87 Routers Projects

  1. 31. How to Make Faux Raised-Panel Cuts

    A panel-saw table can be used with a lot more than just a panel saw. Use these instructions to see how -- with the help of a plunge rou...

    Time:
    --
    Cost:
    $1 - $50
    Difficulty:
    Easy
  2. 32. Router Bit Comparisons

    DIY Network offers basic information about router bits.

  3. 33. 3- Space-Saving Router Table (04:46)

    Construct a custom router table using a router lift & plywood base.

  4. 34. Router Up Close (00:03:31)

    See a router in action in this extreme close-up view.

  5. 35. Using a CNC Router

    A DIYer demonstrates how to use a Computer Numerically Controlled router.

  6. 36. Hoffmann Dovetail Router (01:32)

    This router is equipped with a high-speed motor and a 45-degree fenceplate.

  7. 37. Shop Multipurpose Tool

    DIY Network shows how the homeowners and workshop enthusiasts can use the shop multi-tool. See how this multipurpose tool's attachments...

  8. 38. How to Mortise Using a Router and Corner Chisel

    David Thiel demonstrates the correct way to mortise using a router and corner chisel. These instructions show how to use a trim router ...

    Time:
    --
    Cost:
    $1 - $50
    Difficulty:
    Easy
  9. 39. Storing Blades and Bits

    In order to keep bits, blades and other accessories from being lost, damaged or dulled, it's important that they be stored properly. DI...

  10. 40. Laminate Overlay (00:02:31)

    Laminate overlay adds a contemporary finish to dated cabinet doors.

  11. 41. Dremel Trio (01:05)

    The Dremel Trio is a sander, a router and a drill, all in one.

  12. 42. How to Make a Jig for Cutting Dado Joints

    Routing dado joints can be a nuisance when making several at a time. This simple homemade jig can make the job easier and more accurate...

    Time:
    --
    Cost:
    $1 - $50
    Difficulty:
    Easy
  13. 43. How to Make a Router Bit Storage Case

    This storage case is a simple box with four drawers. Some of the drawers have holes cut inside to hold router bits; the others are regu...

    Time:
    2 hours
    Cost:
    $1 - $50
    Difficulty:
    Easy
  14. 44. How To Cut Tongue-and-Groove Joints

    Tongue-and-groove joints are commonly made on a table saw. But with the right bits, the joints can be made just as easily on a router t...

    Time:
    Under Half Day
    Cost:
    $100 - $250
    Difficulty:
    Moderate to Hard
  15. 45. Terrific Plunge Router Tool (05:56)

    Everything you need to know about using a versatile plunge router.

Advertisement