DIY Network

How to Use a Pneumatic Router for Pattern Routing

A pin router helps make repetitive pattern cuts easily. The most popular application for pattern routing is sign-making. Learn how to u...

DIY Network/Topics /

Routers

Top 87 Routers Projects

  1. 1. Bosch Colt Palm Router (01:51)

    This router may be small, but it is mighty! Check it out.

  2. 2. How to Enlarge a Hole

    Have you ever had to throw out expensive stock because the holes that were cut in it turned out to be too small? Host David Thiel demon...

    Time:
    --
    Cost:
    $1 - $50
    Difficulty:
    Easy to Moderate
  3. 3. Wine Rack (03:43)

    With the help of Marc Bartolomeo, making a wooden wine rack is a snap.

  4. 4. How to Cut Circles and Curves With a Router

    Learn how to use a router and a special jig to cut perfect circles and ovals.

    Time:
    Under Half Day
    Cost:
    $1 - $50
    Difficulty:
    Moderate to Hard
  5. 5. How to Mortise Using a Router and Corner Chisel

    David Thiel demonstrates the correct way to mortise using a router and corner chisel. These instructions show how to use a trim router ...

    Time:
    --
    Cost:
    $1 - $50
    Difficulty:
    Easy
  6. 6. Bookcase (03:46)

    Marc Bartolomeo shows how to frame and assemble a custom bookcase.

  7. 7. Rotary-Tool Accessories

    The rotary tool is a versatile handheld power tool with a rotary tip that accepts a variety of attachments for different tasks. Use thi...

  8. 8. The Essential Power Tools

    There are few things that feel more empowering for the do-it-yourselfer than power tools. DIY Network offers a list of useful power too...

  9. 9. How to Make a Router Bit Storage Unit

    This four-sided unit will help keep router bits in order. It stores bits vertically, and a profile piece explains what each bit will do...

    Time:
    2 hours
    Cost:
    $1 - $50
    Difficulty:
    Easy
  10. 10. The Basics on Cutting Dados

    Use this DIY Network guide to learn more about cutting dados.

  11. 11. How to Make a Featherboard

    A featherboard applies pressure to the edge of a board while it is being run through a machine. Host David Thiel explains how to make a...

    Time:
    --
    Cost:
    $1 - $50
    Difficulty:
    Easy to Moderate
  12. 12. How to Make a Router Bit Storage Case

    This storage case is a simple box with four drawers. Some of the drawers have holes cut inside to hold router bits; the others are regu...

    Time:
    2 hours
    Cost:
    $1 - $50
    Difficulty:
    Easy
  13. 13. Storing Blades and Bits

    In order to keep bits, blades and other accessories from being lost, damaged or dulled, it's important that they be stored properly. DI...

  14. 14. How To Cut Tongue-and-Groove Joints

    Tongue-and-groove joints are commonly made on a table saw. But with the right bits, the joints can be made just as easily on a router t...

    Time:
    Under Half Day
    Cost:
    $100 - $250
    Difficulty:
    Moderate to Hard
  15. 15. 1- Router Techniques (06:21)

    David Thiel demonstrates basic techniques for using plunge & table routers.

« Previous  123...56Next »

Advertisement