DIY Network

DIY Network/Topics /

Power Tools

Top 100 Power Tools Projects

  1. 61. Roto Zip Basics

    DIY Network host Paul Ryan demonstrates how the Roto Zip and its special zip bits can be used to cut difficult holes.

  2. 62. Pressure Washer Up Close (00:02:19)

    An extreme close-up, slow-motion look at a pressure washer in action.

  3. 63. How To Cut a Blind Dado

    Follow these steps for cutting a blind dado using a table saw.

    Time:
    Under Half Day
    Cost:
    $100 - $250
    Difficulty:
    Hard
  4. 64. How to Make a Bent Panel

    Inventor Daryl Kiel's vacuum-molding machine can make decorative curves on panel doors, drawer fronts and stair treads. Here's how to u...

    Time:
    Day
    Cost:
    $100 - $250
    Difficulty:
    Hard
  5. 65. Versasaw

    This innovative attachment is quite versatile in that it turns a power drill into a power saw making projects for DIYers easier than ev...

  6. 66. How to Make an Angle Jig

    Learn how to make a jig that helps drill holes at an angle on the drill press. The jig can be used for making pocket holes or angled ho...

    Time:
    --
    Cost:
    $1 - $50
    Difficulty:
    Easy
  7. 67. Brad Nailer in Slo-Mo (00:00:37)

    A 30-second slow-motion demonstration of a brad nailer at work.

  8. 68. Using a Tile Wet Saw

    A tile wet saw is a faster, easier way to cut tile. DIY experts explain how to use a wet saw and make quick work of cutting tiles.

  9. 69. Winch Versus Hoist

    DIY Network demonstrates the difference between a winch and a hoist.

  10. 70. Pneumatic-Tool Basics

    DIY Network shows why pneumatic (air-powered) tools are great additions to any workshop.

  11. 71. Using a Micro-Adjustable Miter Gauge

    DIY host David Thiel demonstrates a commercially available micro-adjustable miter gauge that increases the accuracy and fit of miter cu...

  12. 72. How to Make a Band Saw Auxiliary Table

    Improve the usefulness of a band saw by making a larger table for it.

    Time:
    2 hours
    Cost:
    $1 - $50
    Difficulty:
    Easy
  13. 73. Circular Saw Guide

    The DIY Network shows you a product that serves as both a guide and a stop for a circular saw.

  14. 74. Demolition Hammer in Slo-Mo (00:00:41)

    A 30-second slow-motion demonstration of a demolition hammer at work.

  15. 75. TIG Welder Basics

    The Tungsten Inert Gas (TIG) welder generates heat from an electric arc between the electrode at the tip of the torch, the filler rod, ...

Advertisement