DIY Network

DIY Network/Topics /

Plumbing

Top 100 Plumbing Projects

  1. 61. Installing a Tankless Water Heater

    Looking for a way to save energy? Get rid of your old hot water heater and replace it with a tankless one.

    Time:
    Under Half Day
    Cost:
    $500 - $1,000
    Difficulty:
    Moderate
  2. 62. Leaky Faucet Fix (03:46)

    Fix your leaky outdoor faucets and pipes with these simple instructions.

  3. 63. How to Install an In-Ground Sprinkler System

    An in-ground sprinkler system is easy to install by following these instructions.

    Time:
    Several Weekends
    Cost:
    --
    Difficulty:
    Moderate to Hard
  4. 64. Plumbing- Part 2 (04:32)

    Contractor Matt Blashaw learns just what goes into engineering a toilet.

  5. 65. Replacing Faucets (01:35)

    You can make a big change in your bathroom just by swapping out the faucet.

  6. 66. Top-of-the Line Appliances (03:18)

    See the installation of top-of-the-line appliances and faucet.

  7. 67. Installing a Grounding Rod (02:54)

    Find out how to install a ground for a safe electrical system.

  8. 68. How to Install a Sprinkler Head

    Installing your own irrigation heads may seem like a daunting task, but it's a lot easier than you might think.

    Time:
    2 hours
    Cost:
    $1 - $50
    Difficulty:
    Moderate
  9. 69. Fixtures: Hot and Cold Running Style

    Whatever your faucet fancy, from Old World to contemporary, DIY Network shows there is a fixture for on the market for you.

  10. 70. Bath Planning Tips (00:03:56)

    Smart planning is a must for saving time and money on a bathroom remodel.

  11. 71. Tips on Determining Hard Water

    Not only can hard water smell and taste bad, it can also damage appliances. DIY Network offers tips on how to determine whether a home ...

  12. 72. Tips on Plumbing and Water Damage

    DIY Network offers repair tips for plumbing and water damage.

  13. 73. What To Do If a Pipe Bursts, Fire Erupts or a Flood Happens in Your Home

    The experts at DIYNetwork.com tell how to respond when pipes burst and septic tanks back up.

  14. 74. How to Install a Point-of-Use System

    Learn how to have instant hot water at every faucet by installing a point-of-use system in the home.

    Time:
    Day
    Cost:
    $500 - $1,000
    Difficulty:
    Moderate
  15. 75. How to Install a P-Trap

    When renovating a bathroom and replacing a shower floor, it's a good idea to replace the P-trap. Use these step-by-step instructions an...

    Time:
    Under Half Day
    Cost:
    $100 - $250
    Difficulty:
    Moderate

Advertisement