DIY Network

DIY Network/Topics /

Pipes

Top 89 Pipes Projects

  1. 61. Installing Irrigation: From Start to Finish

    You can create a home irrigation system with a working knowledge of system components and sprinkler types as well as sprinkler head opt...

    Time:
    --
    Cost:
    --
    Difficulty:
    Easy to Moderate
  2. 62. Master Appliance Triggertorch (01:20)

    This butane torch's attachments solder, sweat copper pipe and cut plastic.

  3. 63. Copper (20:00)

    The average home contains more than 400 pounds of copper!

  4. 64. How to Install a Drain Pipe

    Learn how to install a drain pipe in a new laundry room with these simple step-by-step instructions.

    Time:
    --
    Cost:
    $1 - $50
    Difficulty:
    Easy
  5. 65. Basic Pipe Tips

    DIY Network has straightforward information about pipes, fittings and the fundamentals of plumbing repair.

  6. 66. How to Tap Into the Water Lines for a Wet Bar

    Host Ed Del Grande shows how to tap into the water lines for a wet bar.

    Time:
    Under Half Day
    Cost:
    $100 - $250
    Difficulty:
    Moderate to Hard
  7. 67. Ridgid Auto Spin (01:01)

    This snake is a drain cleaning machine!

  8. 68. How to Solder a Joint

    Soldering -- using a torch to join two metals together -- is a common technique for joining pipes. Master plumber Ed Del Grande demonst...

    Time:
    --
    Cost:
    $1 - $50
    Difficulty:
    Easy
  9. 69. Frozen Pipe Disaster (00:03:32)

    See what to do after a pipe bursts inside in subfreezing temperatures.

  10. 70. How to Solder Copper Pipe Using a Propane Torch

    These step-by-step instructions show how to solder a copper pipe and fittings together using a propane torch.

    Time:
    Under Half Day
    Cost:
    $100 - $250
    Difficulty:
    Moderate
  11. 71. How to Silence a Noisy Pipe

    Learn how to identify a noisy pipe behind the wall in a home and silence it by installing insulation around the pipe.

    Time:
    Weekend
    Cost:
    $100 - $250
    Difficulty:
    Moderate
  12. 72. Ceilings (01:45)

    Learn about ceilings before remodeling a basement.

  13. 73. Plumbing- Part 1 (06:49)

    Contractor Matt Blashaw learns just what goes into engineering a toilet.

  14. 74. The Basics on Drains, Traps and Vents

    DIY Network explains the different types of drains, traps and vents, and how they work in a typical house.

  15. 75. Cut and Solder Copper Pipes (02:35)

    Amy instructs a homeowner in cutting and soldering copper water pipes.

Advertisement