DIY Network

DIY Network/Topics /

Pipes

Top 100 Pipes Projects

  1. 46. Pipe Cutter Power Tool (01:17)

    Take a look at this alternative to cutting tubing for plumbing projects.

  2. 47. Cure for the Cul-de-Sac (00:20:00)

    Jamey and Laura's nasty landscape sits smack at the end of a cul-de-sac.

  3. 50. Ceilings (01:45)

    Learn about ceilings before remodeling a basement.

  4. 51. How to Solder Copper Pipe Using a Propane Torch

    These step-by-step instructions show how to solder a copper pipe and fittings together using a propane torch.

    Time:
    Under Half Day
    Cost:
    $100 - $250
    Difficulty:
    Moderate
  5. 52. How to Run the Plumbing for a Shower

    Host Amy Matthews begins the 44" corner shower installation by running the plumbing for the drain, the valves and the showerheads.

    Time:
    Day
    Cost:
    $100 - $250
    Difficulty:
    Moderate to Hard
  6. 53. Sheltering Exterior Pipes (00:02:01)

    Watch this piece to learn how to keep exterior pipes from freezing.

  7. 54. How To Install Irrigation: Pipes and Fittings

    Growing a gorgeous lawn is easy with good irrigation. Create a great home irrigation system with smart planning and a working knowledge...

    Time:
    Day
    Cost:
    $1 - $50
    Difficulty:
    Easy to Moderate
  8. 55. Rolling Table (03:46)

    A rolling table is designed to straddle a pool table and add work space.

  9. 56. Rigid Pressing Tool (01:05)

    This pipe joining tool crimps even leaking pipes together in seconds.

  10. 57. Plumbing- Part 4 (03:47)

    Contractor Matt Blashaw learns just what goes into engineering a toilet.

  11. 58. Quick-Adjusting Pipe Wrench (01:12)

    The adjusting nut is gone -- and your thumb will be grateful!

  12. 59. Asbestos (01:10)

    Home improvement expert Karl Champley vlogs about where asbestos can hide.

  13. 60. Kleer Drain (01:09)

    See how this drain cleaning system makes unclogging a drain a blast!

Advertisement