DIY Network

DIY Network/Topics /

Jigs

Top 48 Jigs Projects

  1. 31. How To Use A Tenoning Jig

    This mini-course demonstrates how to use a tenoning jig.

    Time:
    Under Half Day
    Cost:
    $250 - $500
    Difficulty:
    Moderate to Hard
  2. 32. How to Make a Straight Ball-Drilling Jig

    Drilling a straight hole into a wooden ball can be difficult. Use these step-by-step instructions to create a jig that'll make it easy ...

    Time:
    Under Half Day
    Cost:
    $1 - $50
    Difficulty:
    Hard
  3. 33. EZ Pocket Hole Jig Kit (01:26)

    Create strong joints in minutes with the E-Z Pocket Hole Jig Kit.

  4. 34. High Tech (20:00)

    Host Chris Grundy checks out a selection of high-tech tools.

  5. 35. Great Jig Shortcut (03:26)

    Make your own cross-cut sled jig to add more stability to your table saw.

  6. 36. Cabinet Construction (02:26)

    Homeowners Tony and Teri Lee share advice on building kitchen cabinets.

  7. 37. How to Construct a Shooting Board for Miter Cuts

    A shooting board must be made with meticulous precision. Follow these step-by-step instructions.

    Time:
    --
    Cost:
    --
    Difficulty:
    --
  8. 38. Kreg Jig K3 Master System (01:48)

    This guide creates holes for pocket joints to be joined with screws.

  9. 39. How to Make a Circle-Cutting Jig

    Use these step-by-step instructions to make a jig that will cut circles through wood or any other material.

    Time:
    --
    Cost:
    $1 - $50
    Difficulty:
    Easy to Moderate
  10. 40. Butcher Block (04:25)

    Marc shows a homeowner how to build his own butcher-block countertops.

  11. 41. Skil Orbital Jig Saw (00:01:45)

    This jig features a laser guide and rotating blade that lightens your load.

  12. 42. Cutting Perfect Stringers (02:12)

    Create perfect stairway stringers with this efficient method.

  13. 43. How to Cut an Octagon on a Table Saw

    A mathematical formula and a jig can help create a perfect octagon. Use these steps to make a jig that guides a table saw to rip off th...

    Time:
    --
    Cost:
    $1 - $50
    Difficulty:
    Easy to Moderate
  14. 44. Tapering Jig for a Table Saw (05:23)

    Fabricate your own tapering jig with tips from host David Thiel.

  15. 45. How to Make an Angle Jig

    Learn how to make a jig that helps drill holes at an angle on the drill press. The jig can be used for making pocket holes or angled ho...

    Time:
    --
    Cost:
    $1 - $50
    Difficulty:
    Easy

Advertisement