DIY Network

DIY Network/Topics /

Jigs

Top 48 Jigs Projects

  1. 16. How to Cut Small Parts on a Table Saw

    Cutting small parts on a table saw can be a dangerous task. Create a jig that eliminates 99 percent of the danger by enabling users to ...

    Time:
    --
    Cost:
    $1 - $50
    Difficulty:
    Easy
  2. 17. How to Make a Straight Ball-Drilling Jig

    Drilling a straight hole into a wooden ball can be difficult. Use these step-by-step instructions to create a jig that'll make it easy ...

    Time:
    Under Half Day
    Cost:
    $1 - $50
    Difficulty:
    Hard
  3. 18. Inventive Ball Drilling Jig (03:36)

    Fabricate a jig for drilling perfectly centered holes in wooden balls.

  4. 19. Uniform Hole Spacing on a Drill Press

    Follow these step-by-step instructions for constructing a jig to ensure evenly-spaced holes when drilling.

    Time:
    --
    Cost:
    --
    Difficulty:
    --
  5. 20. How to Cut an Octagon on a Table Saw

    A mathematical formula and a jig can help create a perfect octagon. Use these steps to make a jig that guides a table saw to rip off th...

    Time:
    --
    Cost:
    $1 - $50
    Difficulty:
    Easy to Moderate
  6. 21. Kreg Jig K3 Master System (01:48)

    This guide creates holes for pocket joints to be joined with screws.

  7. 22. How to Make an Angle Jig

    Learn how to make a jig that helps drill holes at an angle on the drill press. The jig can be used for making pocket holes or angled ho...

    Time:
    --
    Cost:
    $1 - $50
    Difficulty:
    Easy
  8. 23. Whimsical Playroom for Two (06:16)

    See how the designers brighten a playroom with a trio of fun projects.

  9. 24. How to Cut Molding Corners

    Host David Thiel demonstrates how to use a router coping jig for cutting molding corners.

    Time:
    Under Half Day
    Cost:
    $100 - $250
    Difficulty:
    Moderate to Hard
  10. 25. Using a Crosscut Jig

    DIY host David Thiel explains tips for adding a crosscut table in order to cut large pieces of plywood.

  11. 26. How to Make a Miter-Saw Measuring Block

    Making repetitive miter cuts isn't always easy. Use these step-by-step instructions and learn how this special jig can help make accura...

    Time:
    --
    Cost:
    $1 - $50
    Difficulty:
    Easy to Moderate
  12. 27. Porter Cable Omnijig (03:19)

    This jig makes custom dovetail joinery easy for any woodworker.

  13. 28. Great Jig Shortcut (03:26)

    Make your own cross-cut sled jig to add more stability to your table saw.

  14. 29. Tapering Jig for a Table Saw (05:23)

    Fabricate your own tapering jig with tips from host David Thiel.

  15. 30. Joining Tips for Perfect Joint (00:01:00)

    Joining technique quick tips help create a perfectly smooth finished joint.

Advertisement