Top 46 Jigs Projects

1. 1. Butcher Block (04:25)

   

   Marc shows a homeowner how to build his own butcher-block countertops.

2. 2. Tapering Jig for a Table Saw (05:23)

   

   Fabricate your own tapering jig with tips from host David Thiel.

3. 3. EZ Pocket Hole Jig Kit (01:26)

   

   Create strong joints in minutes with the E-Z Pocket Hole Jig Kit.

4. 4. Inventive Ball Drilling Jig (03:36)

   

   Fabricate a jig for drilling perfectly centered holes in wooden balls.

5. 5. 3- Basic Router Jig (04:59)

   

   Making a simple router guide for precision wood working.

6. 6. High Tech (20:00)

   

   Host Chris Grundy checks out a selection of high-tech tools.

7. 7. Kreg Jig K3 Master System (01:48)

   

   This guide creates holes for pocket joints to be joined with screws.

8. 8. Smart Select Jig Saw (01:32)

   

   Takes the guesswork out of sawing with its easy-to-use adjustment dial.

9. 9. Using a Crosscut Jig

   DIY host David Thiel explains tips for adding a crosscut table in order to cut large pieces of plywood.

10. 10. How to Make a Sanding Jig

    

    Be the First

    It can be difficult and dangerous to sand small pieces with a palm sander. This jig is a safe and simple way to sand and hold a wooden ...

    Time:

    --

    Cost:

    $1 - $50

    Difficulty:

    Easy

11. 11. Use Jig in Mounting Hardware (00:01:00)

    

    A simple jig assists in mounting cabinet hardware in the correct position.

12. 12. Cabinet Construction (02:26)

    

    Homeowners Tony and Teri Lee share advice on building kitchen cabinets.

13. 13. How to Cut Circles and Curves With a Router

    

    7 Thumbs

    Learn how to use a router and a special jig to cut perfect circles and ovals.

    Time:

    Under Half Day

    Cost:

    $1 - $50

    Difficulty:

    Moderate to Hard

14. 14. Viewer Jig: Board Center Finder

    

    1 Thumbs

    Host David Thiel shows how to make a jig that can easily help find and mark the center of a board.

    Time:

    --

    Cost:

    $1 - $50

    Difficulty:

    Easy

15. 15. How to Make an Angle Jig

    

    1 Thumbs

    Learn how to make a jig that helps drill holes at an angle on the drill press. The jig can be used for making pocket holes or angled ho...

    Time:

    --

    Cost:

    $1 - $50

    Difficulty:

    Easy