DIY Network

How to Cut Molding Corners

Host David Thiel demonstrates how to use a router coping jig for cutting molding corners.

DIY Network/Topics /

Jigs

Top 45 Jigs Projects

  1. 1. Porter Cable Omnijig (03:19)

    This jig makes custom dovetail joinery easy for any woodworker.

  2. 2. How to Use Jigs With a Drill Press

    The drill press can reduce the work involved in plenty of jobs, but it needs help every now and then. DIY experts show how the two jigs...

    Time:
    Under Half Day
    Cost:
    $250 - $500
    Difficulty:
    Moderate
  3. 3. How to Cut Small Parts on a Table Saw

    Cutting small parts on a table saw can be a dangerous task. Create a jig that eliminates 99 percent of the danger by enabling users to ...

    Time:
    --
    Cost:
    $1 - $50
    Difficulty:
    Easy
  4. 4. Artisans (20:00)

    Chris highlights tools to bring out your artistic side.

  5. 5. How To Use a Radius-Cutting Jig

    The jig cuts perfect radii with a router using a swinging arm.

    Time:
    Under Half Day
    Cost:
    $100 - $250
    Difficulty:
    Hard
  6. 6. How to Make a Straight Ball-Drilling Jig

    Drilling a straight hole into a wooden ball can be difficult. Use these step-by-step instructions to create a jig that'll make it easy ...

    Time:
    Under Half Day
    Cost:
    $1 - $50
    Difficulty:
    Hard
  7. 7. Viewer Jig: Board Center Finder

    Host David Thiel shows how to make a jig that can easily help find and mark the center of a board.

    Time:
    --
    Cost:
    $1 - $50
    Difficulty:
    Easy
  8. 8. How to Make a Sanding Jig

    It can be difficult and dangerous to sand small pieces with a palm sander. This jig is a safe and simple way to sand and hold a wooden ...

    Time:
    --
    Cost:
    $1 - $50
    Difficulty:
    Easy
  9. 9. How to Make a Fence-Straddling Jig

    A homemade push-stick can help keep fingers away from the blade on a table saw. Use these instructions to easily make a stick that fits...

    Time:
    --
    Cost:
    $1 - $50
    Difficulty:
    Easy
  10. 10. How to Make a Jig for Curved Cuts

    Learn how to make this jig made of wiggle board that makes curved cuts in wood.

    Time:
    Under Half Day
    Cost:
    $50 - $100
    Difficulty:
    Moderate
  11. 11. Skil Orbital Jig Saw (00:01:45)

    This jig features a laser guide and rotating blade that lightens your load.

  12. 12. Kreg Jig Essential Wood Tool (00:01:00)

    A kreg jig is a must when building custom doors to use on cabinets.

  13. 13. How to Make a Drilling Guide Block with Bushings

    Host David Thiel shows how to build a jig for installing decorative dowels into box corners. Adding dowels in mitered corners adds stre...

    Time:
    2 hours
    Cost:
    $1 - $50
    Difficulty:
    Easy
  14. 14. Use Jig in Mounting Hardware (00:01:00)

    A simple jig assists in mounting cabinet hardware in the correct position.

  15. 15. High Tech (20:00)

    Host Chris Grundy checks out a selection of high-tech tools.

« Previous  123Next »

Advertisement