DIY Network

DIY Network/Topics /

Framing

Top 100 Framing Projects

  1. 46. Framing Out a Room (04:17)

    DeSilvia and Palanca demonstrate some basics of framing a room properly.

  2. 47. The Basics of Framing A Two-Story House

    DIY Network offers basic tips for framing a two-story house.

  3. 48. Two-Faced Miter Gauge

    DIY Cool Tools and Techniques host David Thiel discusses a very special miter gauge to complement a table saw.

  4. 49. Power Staplers

    Every workshop needs some form of power stapler even if you are a do-it-yourself beginner. This tool comes in handy in many projects.

  5. 50. How to Frame the Roof of a Portico

    Adding a portico with a roof is a great addition to the front of a home.

    Time:
    Under Half Day
    Cost:
    --
    Difficulty:
    Moderate
  6. 51. The Big Basement (03:42)

    Scott saves more than $14,000 by acting as his own general contractor.

  7. 52. Double-Hung Window Update (04:45)

    Host Paul Ryan installs a new double hung window.

  8. 53. Frame Dividing Wall (1 minute) (00:57)

    Framing a dividing wall is a simple project that you can do yourself.

  9. 54. How to Anchor an Outdoor Kitchen Counter

    Anchor the cabinet to the patio and complete the framing.

    Time:
    Weekend
    Cost:
    $250 - $500
    Difficulty:
    Moderate to Hard
  10. 55. Two-Car Garage (03:24)

    Newlyweds replace their tiny garage and give their backyard a boost.

  11. 56. How To Assemble, Cut and Install Lintels for a Pergola

    Learn how to install lentils, which are the pieces that form the outside of the grid on top of a pergola.

    Time:
    Day
    Cost:
    $100 - $250
    Difficulty:
    Moderate to Hard
  12. 57. Compact Framing Saw (01:49)

    Check out the versatility and ergonomics of this pint-sized power tool!

  13. 58. How to Install and Finish Glass Block with Side Accent Windows

    Complete instructions for installing a glass block window and adding finishing touches.

    Time:
    Day
    Cost:
    $100 - $250
    Difficulty:
    Moderate to Hard
  14. 59. Install a Dumbwaiter: Frame the Shaft

    Using 2x4s, host Paul Ryan demonstrates how to frame in the dumbwaiter shaft on the upper and lower floors.

    Time:
    Weekend
    Cost:
    $250 - $500
    Difficulty:
    Hard
  15. 60. Rough Carpentry (03:55)

    Carpenters have only four hours to frame small structures they designed.

Advertisement