DIY Network

DIY Network/Topics /

Electrical

Top 100 Electrical Projects

  1. 61. How to Cut and Grout Kitchen Tile for Electrical Receptors

    Host Paul Wilson shows how to cut kitchen tile for electrical receptors and gives grouting tips.

  2. 62. Bathroom Electrical Tips

    DIY Network shares tips to keep in mind when you're dealing with wiring in a bathroom.

  3. 63. How to Rough-In Wiring

    Once you've determined your new home's electrical needs and planned for the electrical system, it's time for the rough-in stage. Use th...

    Time:
    Month
    Cost:
    --
    Difficulty:
    Hard
  4. 64. How to Make an Overhead Power Strip

    One of the challenges of using a router is keeping the cord out of the way. Use these instructions to make a hinged panel for a power s...

    Time:
    --
    Cost:
    $1 - $50
    Difficulty:
    Easy
  5. 65. Schonstedt XTpc Locator (00:03:17)

    Use this tool to locate your water lines and cable lines before digging.

  6. 66. Extension Cord 101 (02:21)

    We share information on extension cord design and safety.

  7. 67. Under Cabinet Lighting (01:52)

    Paul Ryan shows how to hard-wire lighting under kitchen cabinets.

  8. 68. Stud and Electrical Sensors (04:50)

    Take the guess work out of locating wall studs and electrical wires.

  9. 69. Updated Condo Kitchen (00:03:52)

    The biggest hassle in this couple's $6K kitchen reno? The electrical work.

  10. 70. Step 8: Install Control Switch (01:00)

    How to install the fan controls and adjust the fan for different seasons.

  11. 71. Electrifying Kitchen Remodel (00:03:53)

    This kitchen remodel involves lots of electrical work. Are they up to it?

  12. 72. Concrete-and-Rock-Salt Patio (20:01)

    This backyard turns from a muddy, electrical nightmare to a rockin' patio.

  13. 73. Ceiling Fan Switches (02:08)

    Get some expert advice about installing a dimmer to a ceiling fan.

  14. 74. Overloaded Circuits (00:48)

    Home electronics are better than ever...just don't overload your circuits!

  15. 75. Step 3: Install Support Brace (02:35)

    How to install a support brace for a ceiling fan.

Advertisement