Step 1

Start the Power Tamper

Turn the fuel switch on and give it some choke. Turn the main switch on and make sure the throttle is set to low, then start it up.

Step 2

Give the Tamper Throttle

Once the rammer is running, slowly give it throttle until it starts jumping.

Step 3

walk the power tamper along

Walk the Machine

To move it along, slowly walk the machine ahead of you. It will creep along on its own.

Caution: Wear hearing protection. Watch your toes and take frequent breaks since it gives the arms a good shaking. Only use one person to operate it. Two people are dangerous because of the way it jumps forward.