Vinyl siding can chip or dent. The good news is that it is fairly easy to remove and replace. When removing the siding and the nails, remember to use care as you do not want to damage any house wrap underneath.

Step 1

Remove the Damaged Siding Panels

Insert a zipper into the seam between the top damaged panel and the one above it (Image 1). Pull out slightly so that it is clear of the damaged area.

Remove the nails from the damaged boards (Image 2). Then, remove the damaged panels.

Step 2

Fasten New Pieces of Vinyl Siding in Place

Photo By: DK - Do It Yourself Home Improvement ©2009 Dorling Kindersley Limited

DK - Do It Yourself Home Improvement, 2009 Dorling Kindersley Limited

Install the New Siding Panels

Starting at the bottom, fasten new boards in place.