10 Things You Must Know About Installing a Fence

Installing a fence is as easy as 1-2-3 if you take these tips into consideration.

dten205_1_stain

Tip 1: Let it set before you seal. Once the fence is installed, it's important that you let it dry out. There are certain moistures and finishes that the manufacturer applies to the fence, and if you try to stain and preserve the wood ahead of time, the product you apply probably won't be absorbed by the wood. Remember: Painting needs to be done every few years. Another way to get the fence to last longer is just to apply clear wood preservatives. If you want, you can stain the fence with a coat of stain. All of this will help the longevity of the fence.

Related To:

  1. Fences
  2. Installing

Tip #1

Once the fence is installed, it's important that you let it dry out. There are certain moistures and finishes that the manufacturer applies to the fence, and if you try to stain and preserve the wood ahead of time, the product you apply probably won't be absorbed by the wood. Remember: Painting needs to be done every few years. Another way to get the fence to last longer is just to apply clear wood preservatives. If you want, you can stain the fence. All of this will help the longevity of the fence.

Tip #2

dten205_2_fence

Tip 2: You have to protect a pool. If you have a swimming pool, you must have a fence. Most local codes will dictate that you have a fence that's at least four feet high with a self-closing gate.

If you have a swimming pool, you must have a fence. Most local codes will dictate that you have a fence that's at least four feet high with a self-closing gate.

Tip #3

dten205_3_hinge

Tip 3: Hang it on solid hinges. When people try to build gates themselves, they inevitably undersize the hinges, and the gates weigh too heavily on them. You have to know that the hinges and the posts are going to hold the gate. If you have a pressure-treated gate, which can be very heavy (and when it rains, the wood absorbs water and gets even heavier), you must set the posts much deeper and with more cement around them. In short: make sure the hinges are properly sized to hold enough weight.

When people try to build gates themselves, they inevitably undersize the hinges, and the gates weigh too heavily on them. You have to know that the hinges and the posts are going to hold the gate. If you have a pressure-treated gate, which can be very heavy (and when it rains, the wood absorbs water and gets even heavier), you must set the posts much deeper and with more cement around them. In short: make sure the hinges are properly sized to hold enough weight.

Tip #4

dten205_4_step

Tip 4: Step the fence up the hill. One of the trickiest installations is when you have a change in elevation. If you have to step the fence, set one section at one height and keep moving up as you go along. If you're going uphill or downhill, you'll need to account for this and do it in full increments or half-feet.

One of the trickiest installations is when you have a change in elevation. If you have to step the fence, set one section at one height and keep moving up as you go along. If you're going uphill or downhill, you'll need to account for this and do it in full increments or half-feet.

Tip #5

dten205_5_good-side

Tip 5: Bad fences make mad neighbors. It's important to realize that the nice side of the fence needs to face the neighbors, and the integrity side, with the wood rails and everything else, is going to face the inside. If the nice side faces your house, there could be hard feelings.

It's important to realize that the nice side of the fence needs to face the neighbors, and the integrity side, with the wood rails and everything else, is going to face the inside. If the nice side faces your house, there could be hard feelings.

Tip #6

dten205_6_span

Tip 6: Don't overspan your sections. After you have the post set, depending on the type of fencing, you're going to bring the sections in and attach them between the posts. Since the sections usually come in six- to eight-foot lengths, you don't want to set the posts any more than eight feet apart. If you set them too far apart, the section is without any type of support, so there's a good chance it will be susceptible to wind damage.

After you have the post set, depending on the type of fencing, you're going to bring the sections in and attach them between the posts. Since the sections usually come in 6- to 8-foot lengths, you don't want to set the posts any more than 8 feet apart. If you set them too far apart, the section is without any type of support, so there's a good chance it will be susceptible to wind damage.

Tip #7

dten205_7_concrete

Tip 7: Save the sweat and pour it in. Some people will take the dry concrete mix, put it in the hole and then use a hose to add water. It's an easier way to do it, but the concrete doesn't set as hard. You can set the post right on the soil that's in the hole and put cement around it, because it will become one unit.

Some people will take the dry concrete mix, put it in the hole and then use a hose to add water. It's an easier way to do it, but the concrete doesn't set as hard. You can set the post right on the soil that's in the hole and put cement around it, because it will become one unit.

Tip #8

dten205_8_frostline

Tip 8: Sink posts straight and below the frost. Typically the two most important components of a fence are the posts and the sections. Fenceposts need to be a minimum of two feet in the ground: a good rule of thumb is one-third the length of the post. The other thing to check: local codes, because certain codes may dictate whether you go down four feet or two feet (this also depends on the frost line).

Typically the two most important components of a fence are the posts and the sections. Fenceposts need to be a minimum of 2 feet in the ground: a good rule of thumb is one-third the length of the post. The other thing to check: local codes, because certain codes may dictate whether you go down 4 feet or 2 feet (this also depends on the frost line).

Tip #9

dten205_9_property-line

Tip 9: Before you fence, know your lines. Once you've selected the type of fence you want, it's very important to know where the fence is going to go. The most important thing you need to do is have your property surveyed. You should have a property survey within three to five years; it should show the property lines so when the fence is installed, you are installing in the proper location.

Once you've selected the type of fence you want, it's very important to know where the fence is going to go. The most important thing you need to do is have your property surveyed. You should have a property survey within three to five years; it should show the property lines so when the fence is installed, you are installing in the proper location.

Tip #10

dten205_10_built-to-last

Some fences are for keeping things in or out, and some are for privacy. Fences are also great for decorating your front and back yard to accent your home and to indicate property lines. With so many different types of fences out there, you just to need to know your needs and your taste and build one that will last you and your family a long time.

Next Up

Get Social With Us

We love to DIY. You love to DIY. Let's get together.

More DIY Social

Discover Made + Remade