Step 1: Remove the Doors and Drill the Pilot Holes
Remove doors and drawers (Image 1). Drill pilot holes inside cabinet where the face frames will be attached (Image 2). Use a countersink bit to countersink the holes and screw together.
Step 2: Add Shims if Needed
Check for level and add shims if necessary.
Step 3: Secure the Cabinet
Secure cabinet to wall and add fill strip on the side of the cabinet. Use a shim to hold the fill strip in place while you screw it to the cabinet.
Was this project helpful?
Advertisement
Find your DIY inspiration or just steal ideas from the best renovations and remodels done by the DIY Network pros.
COMMENT ON THIS PROJECT
Sign in
All fields are required.
Signing in
Please enter your email address and we will send your password
E-mail Address
Your password has been sent and should arrive in your mailbox very soon.
Not a member?
Sign up with DIY Network to share tips with other do-it-yourselfers and comment and ask questions on projects.
It's free and easy.
