DIY Network

How to Install Subflooring for a Wood or Concrete Floor (page 1 of 2)

Find out what subflooring material works best with a variety of flooring, then learn how to install it.
Excerpted from Do It Yourself Home Improvement

More in Floors

Step-by-Step Instructions:

A subfloor provides the base for a floor covering. It is applied over the main floor structure, although in some cases the floor itself can provide the necessary base for the floor covering. The most common subfloors are made of ply, which is laid on a wooden floor, hardboard (also laid on wood), and self-leveling compound (on a concrete floor).

Choosing a Subfloor

Existing Floor: Wooden
Suitable Subfloor: 3/4" plywood
Suitable Flooring: Hard tiles

Existing Floor: Wooden
Suitable Subfloor: 3/4" plywood
Suitable Flooring: Soft flooring

Existing Floor: Wooden
Suitable Subfloor: Uncoated plywood
Suitable Flooring: Soft tiles, or clip-together flooring

Existing Floor: Wooden
Suitable Subfloor: Plywood or OSB
Suitable Flooring: Carpet, or vinyl sheet, or floating wooden floor

Existing Floor: Concrete
Suitable Subfloor: 3/4" plywood or 2x4s
Suitable Flooring: Any material

Laying a Subfloor for a Wooden Floor

There are two options for a wooden floor: plywood and OSB. The information below will help you to choose the most suitable for your needs. A subfloor may raise a floor's height and stop a door opening smoothly. Do not trim a door until after you lay flooring: it may be possible to hide a slight step between rooms with a threshold strip.

Choosing to Use Plywood
Use thick plywood as a subfloor for hard tiles, and thinner ply to provide a smooth surface for soft floor coverings such as vinyl, carpet, and soft tiles. Large sheets are ideal for large rooms, because they cover the surface quickly and with fewer joints. The order in which boards are nailed down is not important, except that joints between rows of plywood boards should be staggered to avoid long joints.

Laying Plywood
Decide what type of floor covering you wish to use before laying plywood, because stability and compatibility for the type of floor covering is essential. Before buying plywood, check that it is suitable as a subfloor. If it is not, it may expand or contract, depending on humidity, leading to lumps and bumps in the floor. To avoid unevenness, ensure that the plywood is securely screwed down. Plywood is available in large sheets, at a standard size of 4' x 8'. Use a jigsaw for a curved cut, and make straight cuts as shown below.

Making a Template for Cuts

Make a paper template of any complicated areas, and trace a guide line along which to cut. Use a sheet of paper cut to size, positioned exactly where the board will be placed. Use a jigsaw to cut the board.

Cut slits along the edges of a sheet of paper. Press these slits against the obstacle, and crease them sharply around its shape (Image 1).

Cut along the creases to create a template. Lay the paper on a board, use the cut edge to draw a line, and cut along the line (Image 2).

Cutting 1/4-inch Luan Plywood

To cut a straight line in luan plywood, first use a utility knife to score the smooth side of the board (Image 1). Take care not to let the blade slip.

Turn the board over, and lay a straight edge (such as a meter ruler) along the scored line. Snap the board along the scored line. Separate the two pieces and neaten the cut edge with a utility knife (Image 2).

Laying a Subfloor for a Concrete Floor

Self-leveling compound is a latex-based product which provides a very smooth subfloor. It is needed only if a concrete floor is in poor condition. Despite the name, some smoothing is needed for the best surface. The floor may be raised by the subfloor and flooring, so you may need to trim the lower edge of a door after laying flooring.

Preparing the Surface
Thoroughly clean the floor. Do not lay compound over any residual bitumen-based products from a previous covering. Prime a dusty surface. Attach a threshold strip across the doorway so that compound does not run into the next room.

Mixing the Compound
Use a spotlessly clean bucket, because any impurities will affect the mix's integrity, and use a power stirrer to mix slowly, to avoid introducing too much air. Self-leveling compound sets relatively quickly, and will remain workable for no more than 30 minutes. Follow the steps shown for one bucket-load, and immediately mix and lay the next bucket while the wet edge is still workable. The coverage from a bag of compound depends on how thickly it is laid.

« Previous12Next »

Excerpted from Do It Yourself Home Improvement

© Dorling Kindersley Limited 2009

Advertisement

Projects

COMMENT ON THIS PROJECT

    

Sign in

All fields are required.

E-mail Address:

Password:

Remember me on this computer

Signing in

Please enter your email address and we will send your password

E-mail Address

Your password has been sent and should arrive in your mailbox very soon.

Not a member?

Sign up with DIY Network to share tips with other do-it-yourselfers and comment and ask questions on projects.

It's free and easy.