More in Plumbing
Eyeball the placement of the waterfall and mark the spot on the wall. Find center on the wall (Image 1), then place the hanging bracket on the wall and mark the holes.
Attach a depth guide to a hammer drill and drill holes 1/2" into the tile (Image 2). Screw hanging bracket to wall.
Measure down from hanging bracket to find the location for the top of the bottom basin (Image 1).
Dryfit the basin, mark the hole locations and drill them out. Add anchors for support and attach the basin (Image 2).
Attach slate to the hanging bracket.
Set the pump in the basin and snap in the basin tray, then add rocks.
Fill the fountain with distilled water, which will keep the pump from clogging with hard water deposits.
All fields are required.
Remember me on this computer
Please enter your email address and we will send your password
Your password has been sent and should arrive in your mailbox very soon.
Sign up with DIY Network to share tips with other do-it-yourselfers and comment and ask questions on projects.
It's free and easy.