How to Hang a Shelving and Storage System
More in Remodeling
Step 1: Mark the Holes for the Screws
Check to make sure the floor joists are level.
Mark the holes for the screws, and use 2" screws and #12 plastic anchors to go into the concrete -- supplied with the system.
Step 2: Hang the Cabinets
Assemble the modular cabinets and hang.
Hang any other desired accessory storage items.
Step 3: Secure the Shelf Hanging System
To set the anchors, drill 1/4" holes with a carbide tip masonry bit, and then tap the anchors into the holes.
Screw in the metal shelf hanging system, always checking if they are level.
Was this project helpful?
Advertisement
Find your DIY inspiration or just steal ideas from the best renovations and remodels done by the DIY Network pros.
COMMENT ON THIS PROJECT
Sign in
All fields are required.
Signing in
Please enter your email address and we will send your password
E-mail Address
Your password has been sent and should arrive in your mailbox very soon.
Not a member?
Sign up with DIY Network to share tips with other do-it-yourselfers and comment and ask questions on projects.
It's free and easy.
