How to Clean Tile, Wood and Vinyl Floors
In this Project you will:
Step 1: Clean Ceramic-Tile Floors
Ceramic-tile floors can be cleaned easily with nothing but warm water, but be sure to sweep or vacuum first to remove any loose soil or grit. Never use a sponge mop to clean ceramic-tile floors. It will pull the dirt right into the grout tracks (Image 1). This makes the floor more difficult to clean. A micro-fiber mop (Image 2) picks up all the dirt that a sponge mop leaves behind. Pour the ingredients into a bucket and use a rag or micro-fiber mop to clean. If you do use a rag and the on-your-hands-and-knees method, be sure to wipe in a circular motion across the floor. Don't forget the cabinets and baseboards. If you have really dirty grout, use a brush.
Step 2: Clean Hardwood Floors
Use boiling water and two teabags to clean hardwood floors. The tannic acid in tea creates a beautiful shine for hardwood floors. Let two teabags steep in the boiling water for a few minutes. Pour the tea into a bucket. Take a soft cloth and wring it out in the tea. The cloth merely needs to be damp, not soaked. This will enable the floor to dry quickly. Wash the floor and be ready to be amazed by the sheen.
Step 3: Fill in any Scratches
If there are scratches that stand out after cleaning the hardwood floor, simply take a crayon the color of the floor and rub it on the scratch to fill the gap. Turn a blow dryer on high, heat the area where the crayon was applied and buff it with a soft cloth.
Step 4: Clean Vinyl Floors
Mix borax in a bucket of warm water and wash the floor.
Step 5: Remove Hairspray from Any Surface
Remove hairspray residue from hard surfaces with a solution of one part fabric softener and two parts water.
Was this project helpful?
Advertisement
COMMENT ON THIS PROJECT
Sign in
All fields are required.
Signing in
Please enter your email address and we will send your password
E-mail Address
Your password has been sent and should arrive in your mailbox very soon.
Not a member?
Sign up with DIY Network to share tips with other do-it-yourselfers and comment and ask questions on projects.
It's free and easy.
