Overall dimensions of the queen headboard are shown below. The composition is solid wood.
Select wood boards that are straight. Tip: Pretend the board is an arrow on a bow and look down the length of the board to see if it is straight. Tip: For added character, select boards that are rustic in nature with imperfections, cracks and knots but are straight. To save time, have the lumber store cut your boards as directed in the cut list. Work on a clean, level surface large enough for the project and always wear safety glasses and ensure proper ventilation when painting.
Apply glue to one side of a 1x2 inside leg piece. Lay the 1x2, glue side down, on top of a 1x3 leg piece, lining up outside edge and ends. Nail the 1x2 to the 1x3 every 6-8 inches with 1-1/4 inch nails. Build two of these legs as illustrated above. Tip: As you nail down boards, adjust boards to keep outside edges flush.
Beginning at the top of the headboard, apply glue to ends of a 1x4 panel board. Lay 1x4 panel board on top of legs, and nail down with 1-1/4 inch nails. Use two nails on each end, nailing both sides of panel boards to the legs as illustrated above. Nail remaining panel boards to the legs, using glue and 1-1/4 inch nails, referencing the pattern above for alternating 1x4s and 1x6s. Tip: For increased rustic character, chisel or distress panel boards prior to nailing to the legs, focusing on edges to enhance the planked headboard look.