Budget DIY Project: Turn One Table Into Two Nightstands (page 1 of 2)
By Brian Patrick Flynn, Decor DemonMore in Decorating
Step-by-Step Instructions:
- Prepare Workspace and Determine Dimensions current page
- Cut Table to Size current page
- Sand and Prep for Paint current page
- Apply New Finish current page
- Seal New Finish page 2
- Create a Cleat page 2
- Install Cleat page 2
- Attach Table to Cleat page 2
Prepare Workspace and Determine Dimensions
In a well-ventilated area, cover floors with drop cloths and surrounding walls with plastic sheeting. Measure available floor space on either side of bed to determine necessary width and height of finished nightstands; jot dimensions down on notepad with pencil.
Cut Table to Size
Referring to dimensions on notepad, mark table to correct size with pencil. First, if necessary, cut legs down to proper height using table saw (image 1). Next, use table saw to cut table in half (image 2).
Sand and Prep for Paint
Remove existing finish and rough edges with orbital sander using medium-grit sanding pads. Remove dust and sanding residue with damp cloth.
Apply New Finish
Pour porch and deck paint into paint container portion of paint sprayer. Attach container to sprayer (image 1) and apply an even base coat to table, keeping about eight inches' distance between table and sprayer to avoid paint buildup and dripping (image 2). Allow at least one hour for base coat to dry then apply a final coat.
Advertisement
Find your DIY inspiration or just steal ideas from the best renovations and remodels done by the DIY Network pros.
COMMENT ON THIS PROJECT
Sign in
All fields are required.
Signing in
Please enter your email address and we will send your password
E-mail Address
Your password has been sent and should arrive in your mailbox very soon.
Not a member?
Sign up with DIY Network to share tips with other do-it-yourselfers and comment and ask questions on projects.
It's free and easy.
