DIY Network

Outfit Your Fire Pit

Building a Backyard Fire Pit (page 1 of 2)

Learn how to construct a stone fire pit. Fire brick can be combined with natural field stone or landscape pavers to create your own unique look.

More in Outdoors

firepit is family friendly addition to backyard Watch Video

Here's How You'll Do It:

Plan Your Fire Pit Design

Watch the video of this step.

Backyard fire pits are one of the most popular of all landscaping features. They are attractive, functional and provide an outdoor gathering place.

Ideally, a fire pit is constructed from fireproof material on a flat, level area at least 25 feet from a house or tree. Fire pits are strictly governed by local building codes. Some codes require the pit to be encircled by a border of sand or gravel. So before you decide to add one to your backyard, know the code in your area.

The style and shape of a fire pit can vary. Our circular fire pit is about 2 feet tall and 5 feet in total diameter with a 3-feet interior dimension.

Build the Foundation

Watch the video of this step.

Pound a rebar stake into the ground at the center of the fire pit then mark the circumference of the circle. For a fire pit with a diameter of 5 feet, attach a string to the stake, measure 2-1/2 feet (or half the length of your circumference) and tie this end of the string to a can of spray paint. Pull the string lightly taut and walk around the stake as you spray paint your circumference (image 1).

Dig the space out to a depth of 6 inches. Then use the same method as above to mark an inner circle 12 inches in from the outside circle. This inner circle will be the edge of the fire pit wall.

Make a foundation for the stones to sit upon. Mix concrete with water until it reaches the consistency of peanut butter. Lay the wet concrete in between the two circles so it is level to the ground (image 2). Leave the center area free of concrete to allow for drainage. Build up the concrete until it is about 1-1/2 inches below ground level. Press rebar into the concrete for reinforcement. Smooth the surface with a trowel and let dry for 24 hours (image 3).

« Previous12Next »

Advertisement

Projects

COMMENT ON THIS PROJECT

    

Sign in

All fields are required.

E-mail Address:

Password:

Remember me on this computer

Signing in

Please enter your email address and we will send your password

E-mail Address

Your password has been sent and should arrive in your mailbox very soon.

Not a member?

Sign up with DIY Network to share tips with other do-it-yourselfers and comment and ask questions on projects.

It's free and easy.