A stock feeder is a handy tool for feeding stock into the saw quickly. This stock feeder can also cut the stock forward or backward.
More in Home Improvement
A stock feeder takes the place of a push-stick and helps feed stock smoothly into a stationary power saw.
The stock feeder is attached to the top of the saw with a clamp. Its dial can be adjusted up to a speed of 46 feet per minute and can feed stock forward or backward.
To cut a board using a stock feeder, raise the saw's blade to about 1/4" above the height of the board. Place the board tightly against the saw's fence, and give it a little push. The machine will take over and feed the board through the saw.
Wood Install 101 (04:06)
Installing a Double Wall Oven (02:54)
Go Creative With Bath Flooring (00:01:00)
Mudroom- Part 1 (06:29)
Convert Wood Fireplace to Gas (00:01:00)
Whimsical Fence and Arbor (08:37)
Tiki Hut Bar (01:50)
DIY Portable Kitchen Cart (00:01:00)
How to Use a Gas Compactor (02:05)
Fish Net Craft Ideas (03:08)
Fantastic Bathroom Makeovers 20 Photos
How To Replace a Bathroom Light Fixture 11 Photos
The Most Commonly Used Landscaping Tools 12 Photos
Rock Landscaping Ideas 8 Photos
Nature's Garden Helpers 10 Photos
© 2014 Scripps Networks, LLC. All Rights Reserved.