Flashing helps direct the flow of water around openings. Learn how to correctly install flashing when constructing a new house or altering the exterior of a house.
More in Home Improvement
DK - Do It Yourself Home Improvement © 2009 Dorling Kindersley Limited
When you are roofing around a pipe vent (also called a pipe stack), you will need to cut out the shape of the pipe from the row of shingles. Fit the shingle row around the bottom part of the pipe. Then, slide pipe flashing over the pipe so that it extends 4 inches (100 mm) below the pipe, 8 inches (200 mm) above the pipe, and 6 inches (150 mm) to the right and left. The bottom part of the flashing will overlap the shingle row, as shown.
We sent a note to our support staff about the glitch you just experienced. Please click the button below to reload your content.
A Sharp Edge (02:31)
How to Install a Paver Patio (04:54)
Eight-Level Backyard Deck (00:02:13)
Pergola Installed From Kit (00:02:10)
Martini Bar Basement (20:01)
Gabion Garden Entertainment (20:00)
Build an Outdoor Fireplace (02:48)
Fireplace Upgrade (02:16)
Enhance Your Walkway (00:01:04)
Range Hood Installation (02:51)
Nature's Garden Helpers 10 Photos
Plants That Bloom in Summer 35 Photos
Homemade Pet Treats and Recipes 5 Photos
13 Mowing Tips for a Healthy Lawn 13 Photos
How to Install Doorway Molding 8 Photos
Under-Cabinet Lighting Choices 4 Photos
7 Budget Backsplash Projects 7 Photos
© 2014 Scripps Networks, LLC. All Rights Reserved.