| Building a Child's Bookstand |
|
|
|
advertisement
|
 |
|
Try building a child's book stand. It's a great way to spend time with your kids and a beautiful way to display their favorite books. (SHNS photo by Matt Fox and Shari Hiller/Home and Garden Television.)
|
By Matt Fox
Home and Garden Television One of my most memorable times of growing up was going to the library with my mom. With all those adventures in the pages of books that lined the shelves, I fell in love with reading. I know that you and your children love it, too, so why don't you try building this really neat child's bookstand with your children. It's a great way to spend time with your kids and a beautiful way to display their favorite books. Shari and I love projects that include children; just be careful and teach your kids about shop safety.
Materials: Circular saw/or table saw
Jigsaw with a scroll blade
Compass
Pencil
Finish sander/sandpaper
Drill/drill bits
Finish nails
Carpenters glue
Interior paint/polyurethane Instructions: Step 1: Mark your place. To start you will be marking the side pieces of the bookshelves. I chose poplar for my lumber because I stained the shelf once it was assembled, and poplar can be nicely stained or painted. Cut two pieces that measure 14 inches by 10 inches. Use a circular saw with a cutting guide, or if you are fortunate to have a table saw, use that to cut out your pieces. For safety sake, always read the directions that are provided by the manufacturer for your power tools. Once the pieces are cut, lay the boards flat and find the center of the width of the boards (5 inches) and make a mark at the top of both boards. Place the compass with the point resting on the pencil mark and spread the compass until the pencil is on the edge of the board. From the top pencil mark measure down 5 inches and place a pencil mark, make sure this is square with the top mark. Set the compass point at this mark, and lay out the arch. You should have a curve that touches the top pencil mark and curves out to the edge of the board. Cut out the curve using a jigsaw with a scroll blade. A scroll blade has many fine teeth and makes a nice clean cut and helps cut curves and delicate details. I always cut leaving a little pencil mark and make my final finished look using a finish sander and sandpaper. Sand all edges smooth starting with a 150 grit paper and finishing with a 220 grit paper. Step 2: Between the lines. Now you need to build the shelf, so start by cutting two boards 12 inches by 5-1/2 inches. Create an "L" shape by butt jointing the two pieces together along one edge. Place the shelf between the two sides at a slight angle so that the books will stay in. Attach the shelf to the sides by drilling pilot holes and nailing with 4d finish nails through the holes. Fill all the holes with wood putty, allow to dry and sand flush. Stain the bookshelf a color of your choice. Step 3: To the letter. To personalize the child's initials, (a hobby shop or a craft store is a good source for the letters), I painted the letters with latex satin paint and attached to the side of the bookshelf with finish nails and a bead of carpenters glue. To help preserve the bookshelf, apply two coats of a water-based polyurethane. Allow to dry 24 hours before placing books on the shelf, they'll stick, no kidding. This project is a winner for your children. It will teach them a little about working with tools and woodworking, and what a great way for you to show off your skills. Have fun, and read a book for me! (Matt Fox writes this column with Shari Hiller. They also co-host the Home and Garden Television show "room by room." for more information, visit www.hgtv.com Distributed by Scripps Howard News Service.)
| 
)
