DIY Network

Ed the Plumber

Consult Program Guide for show schedule. Full Schedule

68 How-Tos From Ed the Plumber

  1. 51. How to Install a Point-of-Use System

    Learn how to have instant hot water at every faucet by installing a point-of-use system in the home.

    Time:
    Day
    Cost:
    $500 to $1000
    Difficulty:
    Moderate
  2. 52. How To Install a Sump Pump

    Find out how to install a sump pump to run water away from your house.

    Time:
    Under Half Day
    Cost:
    $100 to $250
    Difficulty:
    Moderate to Hard
  3. 53. How to Remove an Old Dishwasher

    Ed the Plumber host Ed Del Grande demonstrates how to remove an old dishwasher with these step-by-step instructions.

    Cost:
    $1 to $50
    Difficulty:
    Easy
  4. 54. How to Install a Dishwasher

    Learn how to install a new dishwasher.

    Cost:
    $250 to $500
    Difficulty:
    Moderate
  5. 55. How To Install an Outdoor Water Source

    Follow these steps to produce an outdoor water source to dispense water around the yard.

    Time:
    Day
    Cost:
    $250 to $500
    Difficulty:
    Moderate to Hard
  6. 56. How To Install an Anti-Sweat Valve

    An anti-sweat valve is a component that mixes the hot and cold water, keeping the water tank from sweating. Learn how to install one he...

    Time:
    2 hours
    Cost:
    $100 to $250
    Difficulty:
    Moderate to Hard
  7. 57. How to Install a Stop and Waste Valve

    Use these step-by-step instructions and easily install a stop and waste valve in no time.

    Time:
    Under Half Day
    Cost:
    $100 to $250
    Difficulty:
    Moderate
  8. 58. Prepare the Area for Valve Installation

    Host Ed Del Grande demonstrates how to prep the area to begin installing a mixing valve on a water line.

    Cost:
    $1 to $50
    Difficulty:
    Easy
  9. 59. How to Rebuild a Toilet Tank

    Learn how to rebuild an old toilet tank by replacing the inner parts.

    Time:
    2 hours
    Cost:
    $50 to $100
    Difficulty:
    Easy to Moderate
  10. 60. How To Install a Utility Sink

    Follow these steps to install your own utility sink.

    Time:
    Day
    Cost:
    $100 to $250
    Difficulty:
    Moderate to Hard

About This Show

Does confronting a leaky toilet, upgrading a kitchen sink or adding a multinozzle shower head drain you? Ed the Plumber, with master plumber Ed Del Grande, provides detailed step-by-step instructions for some of the most common home plumbing projects, from repairing broken pipes and installing appliances to adding a kitchen garbage disposer. From start to finish, Ed the Plumber plunges right in, explaining and then illustrating the process and tools to get the job done right.

Advertisement

Shows You’ll Like