DIY Network

Ed the Plumber

Consult Program Guide for show schedule. Full Schedule

70 How-Tos From Ed the Plumber

  1. 31. How to Unclog a Toilet

    Bathroom clogs are very common. Here's how to use a toilet auger to get the pipes running freely.

    Cost:
    $1 to $50
    Difficulty:
    Easy
  2. 32. How to Unclog a Bathroom Sink

    Use these step-by-step instructions to see how a few common plumbing tools can easily get a bathroom sink unclogged.

    Cost:
    $1 to $50
    Difficulty:
    Easy
  3. 33. How to Snake the Main Drain

    Sometimes unclogging a drain can be difficult. That's where a jetting machine comes in to tackle the situation.

    Time:
    Under Half Day
    Cost:
    $100 to $250
    Difficulty:
    Easy to Moderate
  4. 34. How to Check a P-trap for a Clog

    Ed the Plumber explains how to how to remove a P-trap and check it for a clog.

    Cost:
    $1 to $50
    Difficulty:
    Easy
  5. 35. How to Install a Body Shower

    Ed the Plumber gives step-by-step instructions on how to install a body shower. The shower is installed right into an existing shower s...

    Time:
    Day
    Cost:
    $250 to $500
    Difficulty:
    Moderate
  6. 36. How to Repair a Kitchen Faucet

    Learn the basics of kitchen faucet repair and how to replace the stems, seals and springs to create a whole new faucet.

    Cost:
    $1 to $50
    Difficulty:
    Easy
  7. 37. How to Rebuild a Leaking Sillcock

    Learn how to rebuild a leaking sillcock in a home with these basic step-by-step instructions.

    Cost:
    $1 to $50
    Difficulty:
    Easy
  8. 38. How to Replace a Toilet and Connect the Water Lines

    These step-by-step instructions show how to replace a toilet and include the following steps: Remove the water, disconnect the tank, in...

    Time:
    Under Half Day
    Cost:
    $100 to $250
    Difficulty:
    Moderate
  9. 39. Installing Water Line Connections for a Steam Shower

    If you're installing a steam shower in your bathroom, you'll have to add a water line connection. Host Ed Del Grande shows how to insta...

    Time:
    Under Half Day
    Cost:
    $50 to $100
    Difficulty:
    Moderate
  10. 40. How to Install Running Water Lines for a Steam Shower

    Installing running water lines is the first step to getting a steam shower in a bathroom.

    Time:
    Day
    Cost:
    $100 to $250
    Difficulty:
    Moderate

About This Show

Does confronting a leaky toilet, upgrading a kitchen sink or adding a multinozzle shower head drain you? Ed the Plumber, with master plumber Ed Del Grande, provides detailed step-by-step instructions for some of the most common home plumbing projects, from repairing broken pipes and installing appliances to adding a kitchen garbage disposer. From start to finish, Ed the Plumber plunges right in, explaining and then illustrating the process and tools to get the job done right.

Advertisement

Shows You’ll Like