203 How-Tos From DIY Tools & Techniques

1. 41. How to Make a Storage Container for Small Parts

   

   2 Thumbs

   Keeping nuts and bolts in an old can? Easily find the right part for the project with this handy organizer.

   Cost:

   $1 to $50

   Difficulty:

   Easy

2. 42. How to Build a Storage Wall

   

   1 Thumbs

   DIY experts give step-by-step instructions on how to easily build a versatile storage wall for any workshop.

   Time:

   2 hours

   Cost:

   $1 to $50

   Difficulty:

   Easy

3. 43. How to Make a Chisel Storage Box

   

   2 Thumbs

   Keep chisels safe and dust-free with this DIY storage case. The box contains two chisel supports -- one for the ferrule and another for...

   Cost:

   $1 to $50

   Difficulty:

   Easy

4. 44. How to Make a Miter Fence Extension and Stop Block

   

   0 Thumbs

   The miter gauge that comes with most table saws isn't long enough to cut long boards. Add a miter fence extension and stop block to inc...

   Cost:

   $1 to $50

   Difficulty:

   Easy

5. 45. How to Set Up a Molding Cutter

   

   1 Thumbs

   A molding cutter can create a variety of molding profiles on a table saw. Use these step-by-step instructions to easily set up a moldin...

   Cost:

   $100 to $250

   Difficulty:

   Moderate to Hard

6. 46. How to Make an Adjustable Outfeed Table

   

   0 Thumbs

   Use these step-by-step instructions to make an adjustable outfeed table that mounts on a portable workbench. Place the table next to th...

   Cost:

   $1 to $50

   Difficulty:

   Easy

7. 47. How to Make a Table Saw Accessory Rack

   

   0 Thumbs

   This useful table saw accessory rack mounts between the motor section and the base of the contractor saw. The rack has two accessory bo...

   Cost:

   $1 to $50

   Difficulty:

   Easy

8. 48. How to Make a Sheet Goods Rack

   

   3 Thumbs

   David Thiel explains how to make a storage rack for tall sheet goods. This is a handy storage unit for any workshop.

   Time:

   2 hours

   Cost:

   $1 to $50

   Difficulty:

   Easy

9. 49. How to Make a Sanding Jig

   

   0 Thumbs

   It can be difficult and dangerous to sand small pieces with a palm sander. This jig is a safe and simple way to sand and hold a wooden ...

   Cost:

   $1 to $50

   Difficulty:

   Easy

10. 50. How to Avoid Problems When Making Half-Lap Joints

    

    0 Thumbs

    A half-lap joint is made of two rabbets that partially overlap. See how to avoid a bad half-lip joint -- one that doesn't mate up well ...

    Cost:

    $1 to $50

    Difficulty:

    Easy