A rotary tool is a handheld power tool with a rotary tip that accepts a variety of attachments for different tasks. Its compact size, versatility and high speed make it an appealing alternative to large, bulky power tools. Sanding drums can be attached for sanding and carving bevels (figure A). Set the rotary tool's speed at medium when using a sanding drum.
Buffing/polishing bits are attached to a rotary tool to add shine to metal surfaces (figure B). Apply a small amount of wax or polish to the bit before turning the tool on at medium speed.
Carbide bits are used for etching or carving (figure C).
Wire wheels are attached to a rotary tool for removing rust from metal (figure D). When using a wire wheel, set the tool at high speed.
A small sharpening wheel may be attached to a rotary tool for sharpening knives, scissors, shears and so on (figure E). Set the tool at high speed when using a sharpening wheel. Sharpen tools away from yourself: sparks tend to fly.
A carbide-metal cutting wheel may be used at medium speed to cut through small pieces of metal (figure F). Use cutting oil on the metal's surface to reduce heat.
RESOURCES :
Dremel Tools
Dremel Corp.
4915 21st St.
Racine, WI 53406-9989
Toll-free: 800-437-3635
Phone: 262-554-1390
Fax: 414-554-7654
Email: dremelcs@execpc.com
Website: www.dremel.com
Vaughan
Vaughan and Bushnell Manufacturing
Hebron, IL 60034
Phone: 815-648-2446
Email: www.vaughnmfg.com/index.html
| 
)
)
)
)
)
)
)
